Ruwacs pneumatic vacuums are designed to deliver power, performance and reliability in applications where electricity is not available or desirable. Our Air Vacuums have no moving parts and are fully groundable, eliminating any shock hazards.
Ruwac solves your cleanup and cross contamination problems by providing reliable, indestructible and maintenance-free vacuums to the powder coating industry. Ruwacs Air Vacuums have more suction than electric vacuums in the same class and the inclusive sound suppression is so brilliantly engineered-you cant even tell that the vacuum is running-its that QUIET!
Rated for continuous duty applications, the AV Series is ideal for explosive atmospheres, eliminating the expense of a 3 phase explosion proof motor.
With so many features in an industrial vacuum, isnt it time you tried Ruwac?
Air Vacuum Table
|Model || |
|Air Requirments ||Vacuum |
(H2O") / Hg")
| L x W x H |
|60 CFM |
|136" / 10.0" max ||150 CFM || 32 x 20 x 41 ||100 |
|100 CFM |
|217" / 16.0" max ||275 CFM || 32 x 20 x 54 ||120 |
Our modular oval construction offers the maximum design flexibility. Changes to the vacuum can easily be made in the field. Ie: change motor decks, add
HEPA filtration. Extensive parts commonality; all parts in stock.
Oval vs Round
Our industrial vacuums were brilliantly engineered using the Oval Principle. Many other industrial vacuums are constructed using a standard round collection container, adding a filter and a motor. Ruwacs are constructed with an oval shaped housing. This shaped has proven to be the most effective when dealing with fine dust.
Static Dissipating Electrically insulating (10-6 ohms resistance) Fully Groundable
Ruwac manufactures all of our machines out of a compression cast composite. This material is put into a press at 900 tons of pressure, insuring a precise mold every time. The material will not rust, is dent free, and abrasion resistant. We warranty all compression cast components for life, guarantying you a long lasting vacuum. Our AV pneumatic industrial vacuums are carbon impregnated compression cast composite. This makes them static dissipating, electrically insulating (10-6 Ohms resistance) and chemical neutral.
Every vacuum should be fully grounded for safety. We offer retractable grounding reels and static dissipating air lines.
Every Ruwac Industrial Vacuum is designed for returning only clean air to the work environment. Our oversized standard filter is 99.9% efficient at .5 microns. This unique designed filter allows the operator to pick up fine material in large quantities, maintaining a low filter loading. Our average filter life is 5 to 7 years, (assuming proper maintenance) and carries a warranty of 3 years. HEPA, ULPA & Active Charcoal Filters available
Some applications require even more filtration than our standard .5 microns.
What first impresses everyone about the Ruwac vacuum is the easy to empty drop down dustpan. Just lift the lever with your foot, and the dustpan is lowered to the floor. Push the vacuum forward, and the dustpan is easy to reach and empty. To replace the pan, no alignment needed, just push it under the vacuum
and step down on the lever.
E - Tip resistant counter-balanced base, with low level hose inlet
Ruwacs air vacuums industrial vacuum cleaners use only the highest quality stainless steel for our venturis. With no moving parts the AV line offers 24/7 continuous operation for your housekeeping or point of source application.
All of Ruwacs industrial vacuums offer inclusive sound suppression. For the continuous duty line sound levels range from 72-78 dBA. Lower sound levels are available, just contact us with your specific application.
H Manual external filter shaker control for easy filter maintenance
With Ruwacs oversized filters, maintenance is reduced to almost nothing. Each time you empty the dust pan, give the external shaker bar one or two shakes and you are ready to return to dust-free cleaning.
Reverse pulse or motorized filter shaker available
I Heavy duty non-marking casters: rear with locking brakes
Ruwac vacuums have large heavy duty non-marking swivel casters on the front and large heavy duty non-marking swivel casters, with brakes on the rear.
Our cast deflector knocks material out of the air stream so that none of the material you vacuum hits the filter directly. Material hits the deflector and then spins around our oval designed dust pan. This slows the material down even more, so only the finest material ever contacts the filter. This allows you to have much longer vacuum cycles and be more productive because time is not spent cleaning or replacing filters!
Powder paint cleanup
Vacuum assist sanding
Lead paint removal