Pre-Scan

By: Island Labs  09-12-2011

Pre-Scan Testing

To avoid any unwelcome surprises when submitting your product for certification, we recommend first doing a quick pre-scan test. This usually involves measuring the emissions from your product across the relevant frequency band to verify compliance with the applicable standards. Also, we can pre-scan any other areas such as ESD or immunity if you want to further minimize the chances of failing during final tests.

We will issue you with a report that identifies and quantifies any problem areas.

Catching these problems early on in the design cycle helps to avoid time-to-market delays and reduces the possiblity of issues cropping up in the full certification testing.



Contact Island Labs

Email - none provided

Print this page

Other products and services from Island Labs

09-12-2011

Certification

We have a fully calibrated 3m Open Area Test Site which enables us to undertake the radiated emission measurements required under the EMC directive. Our facility has full capabilities in conducted and radiated immunity / susceptibility to prove conformance with the relavent standards. PCB Simulation tools to optimize power network performance and minimize radiated emissions. Flicker & Harmonics analysis: 16A supply.


09-12-2011

PCB Review Overview

You receive a full report back within 3 business days which includes a breakdown of potential problem areas and solutions. Includes Hyperlynx power distribution and stackup analysis. Verification of EMC best practices. EMC Engineer reviews your design.


09-12-2011

CE Mark Testing

Whether your product is consumer, wireless, power, medical or industrial, Island Labs can help you gain access to the European Union market with CE Mark (CE certification) compliance testing. The European EMC directive applies to the majority of electronic or electrical products liable to cause or be disturbed by an electromagnetic disturbance.