Kwikon ENT Stub Down
The Kwikon 90º stub down fitting allows users to create a stub down of ENT without penetrating the form. After the concrete pour, the permanently encased fitting is flush with the bottom of the slab deck, ready to accept the connection of ENT raceway.
Kwikon Multi-Link Form Stubby
Designed in convenient rows of three, Kwikon Multi-Link Form Stubbies feature a “snap together” design which enables them to be configured in a variety of tightly grouped formations either end to end and on a 45º pattern.
NEW! The ENT Support Unit (ESU) raises the tubing or conduit up off the concrete form during the concrete pour to maintain a level raceway. With its minimal surface contact, the ESU allows for maximum aggregate flow and concrete consolidation. Perfect for use in high rise, post-tensioned buildings, the ESU snaps around any size ENT. (For more information, refer to the Product Information Bulletin in the "Download" center.)
NEW! Kwikon Single Gang Concrete Wall Boxes offer a fully assembled, PVC alternative for installing boxes in poured-in-place concrete walls. The non-metallic, non-conductive and non-corroding boxes arrive at the jobsite ready to install, eliminating the time-consuming wrapping and taping work associated with traditional metal boxes. (For more information, refer to the Product Information Bulleting in the "Download" center.)
NEW! The Round Floor Box Stand is equipped with several height brackets (2-1/2", 3", 3-1/2" and 4") to accommodate the different rebar and post-tensioned cable heights and slab depths found from job-site to job-site. By raising the Floor Box off the concrete form, the footprint is minimized and it allows the ENT to enter the box in a flat and straight path, resulting in less effort by the contractor. (For more information, refer to the Product Information Bulletin in the "Download" center.)