HVMI Insulation - Therm-O-Light Cellulose

By: Hvmi  09-12-2011
Keywords: Insulation, Building Code, Cellulose

H. Van Moorsel Insulation uses only thoroughly researched products. All products are CCMC approved and meet all building code requirements. Both types of insulation listed below are environmentally responsible products.

Cellulose is the greenest and most all natural insulation. It is made from 100% recycled newsprint that is ground and then treated with various additives to make it resistant to fire, pests and other harmful agents.The effectiveness of insulation is measured by its R-value – the resistance to heat flow. The higher the R-value, the greater the insulation value. is an environmentally friendly, high performance, closed cell rigid polyurethane foam used for insulation and is spray applied exclusively by certified applicators.

Keywords: Building Code, Cellulose, Insulation, Polyurethane Foam

Contact Hvmi

Email - none provided

Print this page

Other products and services from Hvmi


HVMI Insulation Services - Southwestern Ontario

In retrofit wall installations, buildings can be drilled from the inside, as well as the outside and cellulose is blown into the walls. One of the advantages of spray foam is that you can spray it directly against electrical boxes, etc. for a completely sealed area. Sprayed Polyurethane Foam When the foam is sprayed into a cavity it expands to 30x its volume.