HumiSeal® conformal coatings from all chemistries, including acrylics, urethanes and silicones - uv curable type ar ur

By: Humiseal  09-12-2011
Keywords: Insulation Resistance

HumiSeal UV40 is now UL recognised and represents an exciting innovation in UV curable chemistry that provides performance superiority, over both traditional UV curable products and solvent-based materials. UV40 not only maintains the rapid cure speed and environment-friendly nature that is popular in today’s electronic fabrication, it also offers advantages not found in existing UV curable products:

  1. Greater adhesion to a wide range of commonly used solder resists
  2. Higher IR (insulation resistance) and MIR (moisture insulation resistance)
  3. Resistance to a wider range of solvents
  4. Greater flexibility at a wide range of temperatures
  5. Does not become brittle at low temperatures
  6. A truly reliable secondary (shadow area) moisture activated cure mechanism.

These products do not necessarily represent our complete UV Curable (Type AR/UR) range.

Keywords: Insulation Resistance

Other products and services from Humiseal

09-12-2011

HumiSeal® conformal coatings from all chemistries, including acrylics, urethanes and silicones - water based

Water-based conformal coatings, by their very nature are extremely safe, low odour, low VOC products, developed to enable customers to meet the ever stricter emissions targets, not to mention the various health and safety requirements placed on industry. Such as 1H20 AR3 can protect electronics assemblies at temperature extremes far beyond the capabilities of existing resin-based alternatives.


09-12-2011

HumiSeal® conformal coatings from all chemistries, including acrylics, urethanes and silicones - aerosol products

HumiSeal 1A27 is an air curing, single component, clear polyurethane. Characterised by a higher tack resistance at elevated temperatures. A fast air drying, single component, acrylic coating that provides. Available specially formulated for both dip and spray. Fast oxygen curing polyurethane coating well.


09-12-2011

HumiSeal® conformal coatings from all chemistries, including acrylics, urethanes and silicones - silicones

Silicone conformal coatings are most widely used in high temperature environments due to their innate ability to withstand prolonged exposure to higher temperatures than most other conformal coating chemistries. Rework of Silicone coated assemblies can sometimes be difficult due to their chemical resistance and the fact that, unlike Acrylics and Polyurethanes, they do not vaporise with the application of heat.


09-12-2011

HumiSeal® conformal coatings from all chemistries, including acrylics, urethanes and silicones - synthetic rubber

HumiSeal’s Synthetic Rubber products are unique formulations that may enable the user to achieve specific protection / environmental goals not offered by “traditional” coatings. Synthetic Rubber materials are characterized by extremely low glass transition temperatures, resulting in stable modulus over a wide temperature range and extreme flexibility.


09-12-2011

HumiSeal® conformal coatings from all chemistries, including acrylics, urethanes and silicones - urethanes

Single component Polyurethanes, while easy to apply, enjoy long pot life but sometimes require very lengthy cure cycles to achieve full or optimum cure. Two component formulations can reach optimum cure properties in as little as one to three hours with the assistance of heat. Both formulations provide excellent humidity resistance and far greater chemical resistance than Acrylic coatings.


09-12-2011

HumiSeal® conformal coatings from all chemistries, including acrylics, urethanes and silicones - acrylics

Spot removal of the coating to repair a solder joint or replace a component can be easily accomplished by localised solvent application. Acrylic conformal coatings are perhaps the most popular of all conformal coating materials due to their ease of application. Additionally, acrylics give off little or no heat during cure, eliminating potential damage to heat-sensitive components.


09-12-2011

HumiSeal® conformal coatings from all chemistries, including acrylics, urethanes and silicones - products

This means HumiSeal can meet all your requirements with immediate effect while constantly striving to stay one step ahead of your desires as your business develops. We are continually looking to further enhance our product range by being at the forefront of conformal coating innovation and product development. HumiSeal produces conformal coatings from all chemistries, including acrylics, urethanes and silicones, both water based and UV curable.