CDP 310 MBH 2 Temperature Combi DHW System Panel with 4 Pumps and Outdoor Reset

By: Heatlink  09-12-2011
Keywords: Mixing Valve

Date Introduced: 

April 29, 2011

The CDP310R Combi Panels operate as high/low temperature distribution centers, with a boiler (or other non-DHW appliance) as a heat source. The CDP310R panels each have two high temperature branches, one for the indirect-fired DHW tank (with priority) and one for the high temperature heating application. The #31355 Compact Mixing Control with the 3-way mixing valve and actuator will automatically regulate the water temperature in secondary circuit.
Note: When used with boilers requiring a 3rd input a different wiring harness is required (e.g. IBC boilers). Call for details.

Keywords: Mixing Valve

Contact Heatlink

Email - none provided

Print this page

Other products and services from Heatlink

09-12-2011

TWH 70 MBH High Head Tankless Water Heater Mixing Panel with DHW Priority and Zoning

Both the primary and secondary pumps are activated once every 24 hours, for 15 minutes, to ensure that potable water in the piping is not stagnant.When the panel receives a call for heat, both pumps are activated, and the thermostatic control head in the 3-way mixing valve will automatically regulate the water temperature in the secondary circuit.


09-12-2011

HEP 95 MBH Isolation Heat Exchanger Panel

The primary pump is also activated once every 24 hours, for 15 minutes, to ensure that potable water in the piping or heat exchanger is not stagnant. When using the HEPPS priority switch, a flow sensor is installed in the DHW supply to the house downstream from the branch to the HEP panel. The main application of the HEP Isolation Heat Exchanger Panel is to provide single wall isolation between a DHW tank and a heating system.