Haltech – Engine Management Systems » Data Aquisition

By: Haltech  09-12-2011
Keywords: Haltech

Haltech has teamed up with a number of external data aquisition companies to provide racers with complete engine management, data aquisition and display solutions.

In conjunction with global data aquisition giant Racepak, Haltech has released the co-branded Haltech IQ3 Display and logging dashes. These powerful, professional high-tech systems allow the user to sample and display both raw and calculated engine data that the Haltech ECU has on board.

The Haltech IQ3 dash is designed to be a complete display centre with low-glare LCD display and multiple user programmable warning lights to make viewing essential engine information a breeze in all light conditions.

Haltech IQ3 Display Dash

Haltech IQ3 display dash replaces all your gauges with one single digital display panel. Sourcing all its information directly from the Haltech ECU via a simple 2 wire CAN connection the Haltech IQ3 is the perfect data centre for any race enthusiast.

The IQ3 display dash is fully user configurable in its display properties and warning lamp illumination – a must have for that serious racing look.

Haltech IQ3 Logging Dash

The Haltech IQ3 data logger dash represents an entirely new concept in data logging dashes. By placing the 32 channel data logger, 2GB memory card, GPS and 3 axis G meter inside the dash, every feature of the data system is now located in one central location. Combine 32 external channels of data with quick 2 wire CAN connection to a Haltech ECU and you have a virtually limitless amount of data available for collection and analysis. The Haltech IQ3 data logger dash is designed to be a complete data centre. All data is stored in a 2GB MicroSD memory card, located in the front of the dash between the programmable shift lights. This design ensures easy access to the memory card for data download.

Haltech MXL Dash

The Haltech MXL Dash is a powerful, professional and high-tech gauge which allows the user to sample and display a large number of parameters. The Haltech MXL Dash has a bright backlight wide display and a high speed USB data download to PC, which allows data to be analysed using the powerful Race Studio 2 software.

Haltech MXL Street

Haltech MXL Street will assist you in analysing and optimising your vehicle’s performance. Featuring 1 RPM input, 1 wheel speed input, 6 configurable alarm leds, 10 fully configurable shift lights, 128kb of internal memory, 8 configurable channels, the Haltech MXL Street is what you are searching for.

Haltech MXL Track

If you’re a driver, aiming to your best lap, you will find in the Haltech MXL Track a valuable help to analyse and optimise both you and your vehicle’s performances. Featuring 1 RPM input, 1 wheel speed input, 6 configurable alarm leds, 10 fully configurable shift lights, gear number display, internat lateral G sensor, 8 Megabytes of internal memory, 8 configurable channels, kit’s sensors and infrared transmitters and receivers. Haltech MXL Track is what you are searching for.
The additional CAN protocol allows the Haltech MXL Dash to interface with external expansion modules.

Haltech MXL Pro

If you’re looking for excellence, the most performing data acquisition system, the Haltech MXL Pro has everything you need to bring you on the top of the podium. Featuring 1 RPM input, 4 wheel speed inputs, 6 configurable alarm leds, 10 fully configurable shift lights, gear number display, internat lateral G sensor, 16 Megabytes of internal memory, 12 configurable channels, kit’s sensors and infrared transmitters and receivers, Haltech MXL Pro is your ultimate choice.

Use the Autosport connector and deploy a powerful array of sensors on your vehicle, including pressure, temperature, throttle, steering, suspension, wheel speed, Lambda sond, and more. The additional CAN protocol allows the Haltech MXL Dash to interface with external expansion modules.

The Haltech MXL Dash can be interfaced (via CAN or RS-232 serial) with a variety of Haltech ECU’s.

Connect the Haltech MXL Dash to your vehicle’s ECU and unleash the MXL’s true power: Logging and displaying dozens of channels straight from the vehicle’s nerve center, including specialised sensors built into the vehicle. This is often the quickest and easiest setup, needing only 1 cable connection to the ECU instead of multiple connections to analog sensors, yet it yields the most dramatic results.

Get the most from practice and training sessions by objectively comparing data from runs using different vehicle setups, drivers, and driving strategies to find the winning combinations. The Haltech MXL Dash uses state of the art algorithms to sample, calculate and display RPM, lap time, gear position, wheel speed, temperatures and more.

Also with an optional GPS module you can create detailed 3D track maps.

Keywords: Haltech

Other products and services from Haltech

09-12-2011

Haltech – Engine Management Systems » Terminated Engine Harness

These harnesses come complete with OEM connectors, and are designed to be the fastest and most cost effective way to wire your Haltech ECU to your race car or engine conversion. Haltech has developed pre-terminated engine harnesses to suit the following engine applications. Mazda 13B (S4/S5 2nd generation engines. Quick ‘N’ Easy Plug-In Engine Harness.


09-12-2011

Haltech – Engine Management Systems » WideBand 02

Control 2 sensors with 1 controller *•Uses default 02 Sensor calibration in your Haltech software•Easy to calibrate and install•Easy to integrate into your Haltech ECU•Available with or without gauge•Gauges available with silver or black bezel•Produces reliable and consistent readings. Only one sensor is supplied with the kit.


09-12-2011

Haltech – Engine Management Systems » Software

2D and 3D views for 3D maps- Simple drag and drop actions allow gauges to be moved and resized- New gauges can be added with a few clicks of the mouse- Tuning pages can be saved and loaded and even e-mailed to share your pages with other Haltech ECU Manager users.