Product Details Page - Fox Blocks Block Corner

By: Fox Blocks  09-12-2011
Keywords: Reinforcing Steel, Expanded Polystyrene, Injection Molded

Fox Blocks Corner Block

Description

The 90 Degree Corner Block typically makes up 10-15% of the ICF wall assembly on most residential & commercial jobs. This block has six (6) strong full length injection molded plastic ties made from Polypropylene (PP)regrind resin that are well marked with the word "Fox Blocks" located on both sides of the block. The corner block also has one (1) patent pending corner bracket designed like no other in the ICF Industry. This 7/32" thick x 1-1/2" wide corner bracket was engineered to add more strength/support to the block because it connects the inner/outer 1.5 pcf density modified Expanded Polystyrene (EPS) foam panels together and is designed with a round through hole in the outer panel for the installation of a 3/4" PVC or metal pipe to reinforce the corner once the wall is built to eliminate blow-outs during the concrete pour. The bracket has a marketed exterior fastening surface that is very large on both sides of the block to secure exterior veneer finishes. The blocks are stacked tightly together at the corner locations and inter-locked end to end to the Straight Blocks to the desired wall length. Once a single layer or course of ICF blocks is installed, horizontal reinforcing steel bars are inter-locked securely together in the ties of the blocks, then another course of blocks are placed firmly on top as the wall is built. To improve construction wall strength during installation, each course of blocks should have their end-joint connections staggered in a running bond method from the course adjacent to it.

Form Width Length Core Width Return Surface Area Concrete Vol
9.25" 38" 4" 22" 6.67 sq. ft. 0.07 cu. yd.
11.25" 40" 6" 24" 7.11 sq. ft. 0.105 cu. yd.
13.25" 42" 8" 26" 7.56 sq. ft. 0.145 cu. yd.
17.25" 46" 12" 8.42" 8.42 sq. ft. 0.212 cu. yd.
Fox Blocks Accessories
  • Fox Blocks 4" Height Adjuster

    Add 4" of height to your Fox Blocks wall.

  • Fox Blocks Stirrup

    Connect horizontal rebar in 6" or 8" Corbel Ledge blocks.

Keywords: Corner Bracket, Expanded Polystyrene, Exterior Veneer, Injection Molded, Injection Molded Plastic, Molded Plastic, Reinforcing Steel, Reinforcing Steel Bars, Running Bond, Steel Bars,

Other products and services from Fox Blocks

09-12-2011

Product Details Page - Fox Blocks Block Angle

Once a single layer or course of ICF blocks is installed, horizontal reinforcing steel bars are inter-locked securely together in the ties of the blocks, then another course of blocks are placed firmly on top as the wall is built. The 7/32" thick x 1-1/2" wide corner bracket was engineered to add more strength/support to the block by reinforcing the corner once the wall is built to eliminate blow-outs during the concrete pour.


09-12-2011

Product Details Page - Fox Blocks Block Straight

Once a single layer or course of ICF blocks is installed, horizontal reinforcing steel bars are inter-locked securely together in the ties of the blocks, then another course of Straight Blocks are placed firmly on top as the wall is built. This block has six strong full length injection molded plastic ties made from Polypropylene regrind resin that are well marked with the word "Fox Blocks" located on both sides of the block.