| Leaf Spring Bushings

By: Energy Suspension  09-12-2011

  • Adds a dramatic amount of performance and durability to any vehicle!
  • For cars, trucks and SUVs.
  • Helps the vehicle be in control - when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms.
  • Made of Energy's HYPER-FLEX™ performance polyurethane which lasts 5 -10 times longer than conventional rubber components.

The original factory auto manufacturers are slowly coming around.. polyurethane is finally being used for leaf spring bushings.

For high-performance applications, the combination of heavy duty or performance leaf springs and HYPER-FLEXâ„¢ performance polyurethane spring bushings deliver the maximum benefit. For lighter-duty leaf springs they add a higher degree of performance and durability. In either situation, you'll immediately feel the difference in positive hanling and control!

Many sets come complete with heavy-duty metal sleeves to add to the durability of the set. When applicable, many sets contain Energy's own pre-lube lubricantfor smooth operation of the bushings. Available in red or black.

The Problem- worn, even many new original vehicle leaf spring bushings are just too soft: in turns and when maneuvering left to right. The Cure- Energy's performance polyurethane bushings deliver greater stability and does it for many more miles because of HYPER-FLEX™ polyurethane material strength.

The information in this article was current at 06 Dec 2011

Other products and services from Energy Suspension

09-12-2011 | Control Arm Bushings

Energy's HYPER-FLEX™ performance polyurethane control arm bushings do not rot or deteriorate from oils or atmospheric conditions such as ozone, smog, road salt, chemicals, and other corrosives. On the rear, these control arm bushings are a must for controlling wheel hop and increasing cornering control for competition uses as well as maintaining alignment on and off-road.

09-12-2011 | Coil Lift Isolators

Please refer to the specific vehicle page for the proper O.E.M./stock style sway bar bushing sets BEFORE choosing sway bar bushing sets from this page. Made of HYPER-FLEX™ performance polyurethane, they are extremely durable -delivering years of trouble-free service. Energy Suspension® performance polyurethane Coil Lifts are an economical way to increase vehicle height. Jeep Grand Cherokee ZJ '93-98 all. Jeep Wrangler TJ '97-06 all.


C-Bushings, Radius & Track Arm Bushings

Energy's Strut Arm Bushings or also called Radius Rod Bushings are formulated with a softer durometer formulation to help prevent binding - due to the pivot action required for suspension's to properly travel. We've specially engineered these bushing components for Tracking Arms, Strut Arms, and C-Bushings for Ford trucks to do a specific job - dramatically improve the vehicle.


Body Cab & Subframe Mounts

Energy's specially formulated HYPER-FLEXpolyurethane cab and body mounts combine the best qualities of both: they're soft enough for a smooth ride, yet rugged enough for the most demanding road or track. They replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off.

09-12-2011 | Bump Stops

HYPER-FLEX™ performance polyurethane bump stops for control arms, traction bars, leaf springs, etc. are guaranteed to last longer and operate more efficiently than original rubber stops. Our large competition race style bump stops smooth out compression better and have a large reinforced metal plate welded to the mounting plate and molded-in.

09-12-2011 | Products

Energy Suspension has a vast product line of polyurethane components for all corners of the motorsports industry some of the uses for polyurethane are in industries completely unrelated, so we felt that to be fair, many of our products are labeled "Universal" making them more assessable to all involved.