| Control Arm Bushings

By: Energy Suspension  09-12-2011
Keywords: suspension, Arm Bushings, Bushing Sets,

  • For both front and rear of suspensions on cars, trucks and SUVs.
  • Maintains proper alignment under extreme conditions on and off -road and during competition.
  • Improves vehicle handling, cornering and overall control.
  • Full floating, for smoother operation.
  • Made of Energy's HYPER-FLEX™ performance polyurethane to add performance and durability.

On the front of vehicles - they make a dramatic improvement in the way they handle, with quicker steering response and greater vehicle control. Whatever your demands, proper alignment (caster and camber) is better maintained by the use of the correct performance durometer of the bushing's material formulation.

On the rear, these control arm bushings are a must for controlling wheel hop and increasing cornering control for competition uses as well as maintaining alignment on and off-road.

All of Energy's control arm bushings are full-floating and non-binding.. especially important when ride height is altered or greater suspension load is required. Most are pre-lubricated. This is especially important for both lowered and raised vehicles that have had drastic suspension geometry modifications. Energy's HYPER-FLEX™ performance polyurethane control arm bushings do not rot or deteriorate from oils or atmospheric conditions such as ozone, smog, road salt, chemicals, and other corrosives. They will not deteriorate in a few short years and cause that mushy, uncertain steering response- like rubber O.E.M. ones often do. Most sets come with zinc plated outer metal shells.

The Problem- Weak rear control arm bushings will flex so much during launching damage can occur to the drivetrain over a short time. The Cure- durable HYPER-FLEX™ polyurethane will flex but hold the rear drivetrain system in proper alignment.

NOTE: Please refer to the specific vehicle page for the proper O.E.M./stock style sway bar bushing sets BEFORE choosing sway bar bushing sets from this page.

Keywords: Arm Bushings, Bushing Sets, suspension,

Other products and services from Energy Suspension

09-12-2011 | Coil Lift Isolators

Please refer to the specific vehicle page for the proper O.E.M./stock style sway bar bushing sets BEFORE choosing sway bar bushing sets from this page. Made of HYPER-FLEX™ performance polyurethane, they are extremely durable -delivering years of trouble-free service. Energy Suspension® performance polyurethane Coil Lifts are an economical way to increase vehicle height. Jeep Grand Cherokee ZJ '93-98 all. Jeep Wrangler TJ '97-06 all.


C-Bushings, Radius & Track Arm Bushings

Energy's Strut Arm Bushings or also called Radius Rod Bushings are formulated with a softer durometer formulation to help prevent binding - due to the pivot action required for suspension's to properly travel. We've specially engineered these bushing components for Tracking Arms, Strut Arms, and C-Bushings for Ford trucks to do a specific job - dramatically improve the vehicle.

09-12-2011 | Leaf Spring Bushings

Helps the vehicle be in control - when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy's HYPER-FLEX™ performance polyurethane which lasts 5 -10 times longer than conventional rubber components. Even many new original vehicle leaf spring bushings are just too soft: in turns and when maneuvering left to right.


Body Cab & Subframe Mounts

Energy's specially formulated HYPER-FLEXpolyurethane cab and body mounts combine the best qualities of both: they're soft enough for a smooth ride, yet rugged enough for the most demanding road or track. They replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off.

09-12-2011 | Bump Stops

HYPER-FLEX™ performance polyurethane bump stops for control arms, traction bars, leaf springs, etc. are guaranteed to last longer and operate more efficiently than original rubber stops. Our large competition race style bump stops smooth out compression better and have a large reinforced metal plate welded to the mounting plate and molded-in.

09-12-2011 | Products

Energy Suspension has a vast product line of polyurethane components for all corners of the motorsports industry some of the uses for polyurethane are in industries completely unrelated, so we felt that to be fair, many of our products are labeled "Universal" making them more assessable to all involved.