C-Bushings, Radius & Track Arm Bushings

By: Energy Suspension  09-12-2011
Keywords: suspension, Arm Bushings

  • The C-bushings for Ford trucks add performance and much needed correction of the suspension geometry, especially when lift equipment is used!
  • Polyurethane components with high strength engineered-in by design.
  • Made of Energy's HYPER-FLEX™ performance polyurethane to add both performance and durability.

We've specially engineered these bushing components for Tracking Arms, Strut Arms, and C-Bushings for Ford trucks to do a specific job - dramatically improve the vehicle!

Energy's Strut Arm Bushings or also called Radius Rod Bushings are formulated with a softer durometer formulation to help prevent binding - due to the pivot action required for suspension's to properly travel.

Energy's C-bushings for Ford trucks are a firmer durometer than O.E.M. rubber ones. They maintain proper caster alignment during all adverse conditions. Three degree styles are available to accommodate various vehicle lift configurations. They are available in 2, 4 and 7 degree positive caster (for stock and two height altered suspension configurations).

Energy's Track Rod Bushings help prevent the front suspension system from shifting unwontedly left to right during both normal or rugged/performance driving.

Keywords: Arm Bushings, suspension,

Other products and services from Energy Suspension

09-12-2011

energysuspension.com | Control Arm Bushings

Energy's HYPER-FLEX™ performance polyurethane control arm bushings do not rot or deteriorate from oils or atmospheric conditions such as ozone, smog, road salt, chemicals, and other corrosives. On the rear, these control arm bushings are a must for controlling wheel hop and increasing cornering control for competition uses as well as maintaining alignment on and off-road.


09-12-2011

energysuspension.com | Coil Lift Isolators

Please refer to the specific vehicle page for the proper O.E.M./stock style sway bar bushing sets BEFORE choosing sway bar bushing sets from this page. Made of HYPER-FLEX™ performance polyurethane, they are extremely durable -delivering years of trouble-free service. Energy Suspension® performance polyurethane Coil Lifts are an economical way to increase vehicle height. Jeep Grand Cherokee ZJ '93-98 all. Jeep Wrangler TJ '97-06 all.


09-12-2011

energysuspension.com | Leaf Spring Bushings

Helps the vehicle be in control - when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy's HYPER-FLEX™ performance polyurethane which lasts 5 -10 times longer than conventional rubber components. Even many new original vehicle leaf spring bushings are just too soft: in turns and when maneuvering left to right.


09-12-2011

Body Cab & Subframe Mounts

Energy's specially formulated HYPER-FLEXpolyurethane cab and body mounts combine the best qualities of both: they're soft enough for a smooth ride, yet rugged enough for the most demanding road or track. They replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off.


09-12-2011

energysuspension.com | Bump Stops

HYPER-FLEX™ performance polyurethane bump stops for control arms, traction bars, leaf springs, etc. are guaranteed to last longer and operate more efficiently than original rubber stops. Our large competition race style bump stops smooth out compression better and have a large reinforced metal plate welded to the mounting plate and molded-in.


09-12-2011

energysuspension.com | Products

Energy Suspension has a vast product line of polyurethane components for all corners of the motorsports industry some of the uses for polyurethane are in industries completely unrelated, so we felt that to be fair, many of our products are labeled "Universal" making them more assessable to all involved.