Aluminium pigments - ECKART

By: Eckart  09-12-2011
Keywords: Complete Product

The aluminium pigment flakes from ECKART are produced on the basis of pure aluminium (min. 99.5%). Atomised aluminium powder is deformed and broken down during the wet or dry-milling process to form flakes. In subsequent stages, the pigments are classified according to the relevant application and then further refined.

On the basis of aluminium pigments, ECKART offers a complete product range for every area of application; this ranges from powders, pastes and pellets to dispersions and printing inks.

Keywords: Complete Product

Other products and services from Eckart

09-12-2011

Products - ECKART

When looking for the most suitable product for your application, you will here find our complete product portfolio, ranging from powders to printing inks; these pages are organised according to the different types of basic pigments. Depending on which property is particularly important to you and which result you wish to obtain, we can offer a large range of different starting materials.


09-12-2011

Powder - ECKART

Notes on processing Like all materials in powder form, aluminium powders can form explosive dust/air mixtures when they come into contact with air. Take measures to prevent electrostatic charging. Do not use vacuum cleaners to remove residue. Avoid any contact with moisture.


09-12-2011

Metal-pigment coatings - ECKART

Our product range covers a wide range of application fields: decorative paints for DIY and leisure activities, weather-resistant paints for house and garden, and heat-resistant coatings for extreme fields of application such as vehicle engines. Special-purpose paints from ECKART provide all-round protection from weather, rust and heat while at the same time offering exceptional, brilliant colour properties.


09-12-2011

Pastes - ECKART

In order to achieve this, it is important to pre-disperse the metallic pigments in the solvent, adding a suitable wetting agent to further enhance the dispersion. Notes on processing:The complete dispersion of the metallic pigments in the coating is a pre-requisite to achieve optimum effect formation and a uniform finish.