DuraPro™ - An IFS Brand - hot melt

By: Durapro  09-12-2011

DuraPro™ - An IFS Brand

IFS has a full line of hot melt adhesives that bond the most difficult substrates. Our Dura Pro™ products range from 1,000 to 25,000 cps in viscosity at temperatures ranging from 120°C (250°F) to 175°C (350°F). Open times range from 2 - 60 seconds with immediate fiber tear, have heat resistance up to 200°F and come in colored, clear or opaque finishes.

Other products and services from Durapro


DuraPro™ - An IFS Brand - reactive

Open times can be formulated to range from 5 seconds to 20 minutes with immediate fiber tearing bonds and these adhesives have excellent resistance to heat, moisture and exterior aging once fully cured. PUR adhesives can be produced in many forms including one-component, two-component, dispersion and solvent-based, depending on your application requirements.


DuraPro™ - An IFS Brand - polyvinyl acetates

PVAc adhesives were first used to replace hide glues in the 1940's and are now the most widely used technology on the market. Poly vinyl acetate emulsions are also used in paints, textile sizing and as non-woven binders. Polyvinyl acetate is a synthetic polymer and a member of the vinyl ester family.


DuraPro™ - An IFS Brand - homopolymer emulsion

Homo-polymers are the most commonly used technology on the market due to their excellent adhesion to a wide variety of "polar" substrates, particularly cellulosic-based substrates such as paper and wood. Dura Pro™ polymers are hard and brittle with high molecular weight, high tensile strength, rapid setting speed and are extremely cost effective.


DuraPro™ - An IFS Brand - emulsion polymer isocyanate

Dura Pro™ EPIs are two-component adhesives based on reaction of a mixture of water based emulsions of SBR, EVA and PVAc type with an isocyanate hardener (cross-linker) forming water-resistant bonds. EPI adhesives can be formulated in many ways to give the optimal performance with respect to water resistance, curing speed, type of substrate, strength and viscosity in each bonding operation.


DuraPro™ - An IFS Brand - water based

IFS has a full line of proprietary Polyvinyl Acetate, VAE Copolymer, Acrylic, Polyurethane, Dextrin and Natural Rubber Latex Emulsions. Full product range for all hot, cold and RF Pressing as well as the fastest line speeds. Products range from 35-70% in solids and 300 to 100,000 cps in viscosity. DuraPro™ - An IFS Brand.