Fluoropolymer coatings are extremely resistant to chalking and ultraviolet deterioration and provide exceptional colourfastness.
These coatings provide resistance to environmental acids, alkalis and salts, as well as erosion from wind, rain, snow and sleet.
Properly applied over pretreated and primed aluminum surfaces, these coatings will resist chipping, peeling and flaking.
Fluoropolymer coatings contain an inert fluoropolymer resin base known as kynar. They come in both a 70% kynar base and a 50% kynar base.70% Fluoropolymer
These coatings exceed all test requirements of AAMA, specification 2605, which covers high performance organic coating on architectural aluminum extrusions and panels.PPG® 70% Fluoropolymer Coatings
VALSPAR® 70% Fluoropolymer Coatings
Fluropon Classic II®
These coatings exceed all test requirements of AAMA, specification 2604, which covers high performance organic coatings on architectural extrusions and panels.
50% fluoropolymer coatings are appropriate for non-monumental commercial, industrial, institutional, storefront, residential or interior.PPG® 50% Fluoropolymer Coatings
VALSPAR® 50% Fluoropolymer Coatings
Acrylic EnamelsDuracron® by PPG®
Duracron® thermosetting acrylic enamels, when applied over properly pretreated aluminum, meet or exceed the AAMA 2603 specifications.
Duracron® gives excellent corrosion resistance, film integrity, colour control, impact and mar resistance.
Duracron® is recommended for use on residential windows, storm and patio doors, railings, trim, various other building components and interior commercial applications.
It is not recommended for exterior monumental buildings or highrise curtain wall.
Pick-ups and Deliveries are available in the Greater Toronto Area.
|Colour Code||Name||Colour Code||Name|
| || || || |
|K1285||Glossy White||K70632||Light Bronze|
|K72204||Oak Brown||K90421||Matte Black|