Building Access System (BAS

By: Dps Telecom  09-12-2011
Keywords: alarm, Network Alarm

The Building Access System gives network alarm managers the ability to control and regulate door entry access. With a built in fault tolerance system this security management system can effectively control your sites.

  • Centralized entry management and control
  • Controls and regulates up to 16 door entry points (*8 per RS485 port)
  • Supports up to 1,300 users
  • Users can be granted access by day of the week, time of day, and location
  • New! Now available - Electromagnetic door locks
  • Supports up to 16 doors per site
  • Units function independent of master
  • System can withstand connectivity losses to the local NetGuardians and T/Mon

BAS Software Module

The BAS functions as a software module in T/MonXM software. It is a profile-based access system that assigns each user with a unique user profile containing information on which sites are allowed to be accessed, the door numbers, days of the week access is allowed, a start/stop time, and a beginning and ending date (primarily for contractors, new employees, or short term employees).

The NetGuardian 216F indicates conditions such as valid entry, invalid access attempt, and system lockout. The unit supports up to 1,300 user profiles for distribution between door entry points.

Entry Control Unit (ECU)

The ECU is powered by -48VDC and is wall mountable on the interior of the building. The unit has LEDs for power, communication, fuse alarm, and an LED that that echoes the door status.

Proxy Reader

A proximity card reader is now available for the BAS. This eliminates the chance of forgotten keycodes and increases your level of access control. An employee can easily share a keycode with others, but not a proxy card. In the event that a card is lost or stolen, it can be deactivated in seconds and a new card may be issued in its place.


New BAS Features:

"Extended Propped Door" Mode

When activated, Extended Propped Door Mode allows the specifed door to remain propped open without triggering a propped door alarm. This is useful during equipment installations that require frequent entries. When the door is closed, it will lock until you deactivate Extended Propped Door Mode.


"Stay Open" Mode

Stay Open Mode allows a door to remain unlocked. One typical application is for a front lobby. In the morning, your receptionist can scan a special card. The door will then remain unlocked for business until the same card is swiped again at the end of the day, locking the door for the night.


To find out more about this and other DPS applications, give us a call at our toll-free number and talk to one of our network specialists. They'll help you put together a perfect fit solution for your network!

Keywords: alarm, Network Alarm

Contact Dps Telecom

Email - none provided

Print this page

Other products and services from Dps Telecom

09-12-2011

Choose from the type of T/Mon hardware you need

T/Mon LNX Remote Alarm Monitoring System The T/Mon LNX Remote Alarm Monitoring System is a multiprotocol, multifunction network alarm manager designed as a single-platform solution for all alarm monitoring applications. T/Mon collects alarm data from a wide variety of equipment, regardless of manufacturer or protocol.


09-12-2011

RTU Units - Perfect for Your Spec, Needs, and Budget

To find out more about this and other DPS applications, give us a call at our toll-free number and talk to one of our network specialists. DPS Telecom RTUs deliver the alarm capacity, protocols, data transport and alarm management features you need. They'll help you put together a perfect fit solution for your network. 2010 Product Showcase For an overview of DPS remotes.