Environmental Products | Manufacturers of Cooling Towers, Cooling Systems and Air Strippers by Delta Cooling Towers, Inc

By: Delta Cooling Towers  09-12-2011
Keywords: tower

Vanguard® Air Strippers are custom designed up to 15 foot diameter and 4000 GPM per column. Delta has provided innovative and economical air stripping solutions to more than 500 installations since our first Air Stripping Tower was delivered over 25 years ago in 1981.  Today, air stripping continues to ..

Vanguard® Scrubbers and Odor Control Systems are custom designed for air flow rates of 1,000cfm to 75,000cfm per column.  Wet Scrubbing is the industry standard for the treatment of odors prior to releasing the air stream to atmosphere, because it is the most cost effective when considering initial operating and maintenance costs.   Scrubbers are ..

The Chemical Cleaning System is a pre-engineered and shop assembled clean-in-place system, Air Strippers and Degassifiers.  The automated system utilizes a powerful acid solution for the most efficient cleaning cycle possible.  This cleaning cycle returns the packed tower to its original condition increasing the tower’s performance and saving blower energy ..

The Delta AS line of Box Style Aeration Towers are a low cost alternative to Packed Tower Air Strippers.  They are available in Aluminum, Stainless Steel, and Fiberglass and can be sized for flow rates from 100gpm to 3,000gpm.  Delta's AS Box Style Aeration Towers are typically used to assist in pH ..

By offering complete Turn-Key Packages, Delta Cooling Towers, Inc. has the ability to supply our clients with a complete functional system.  Our packages are fully factory assembled and tested prior to shipment, guaranting a quick installation and commissioning process.  The equipment is preinstalled on a structural skid base with all of the necessary ..

Delta-Pak®  is a highly efficient, low fouling propriety structured packing, manufactured by Delta, that is often the preferred mass transfer media.  Delta-Pak® is a specifically formed PVC, spirally wound structured packing media, which, when installed in an air stripper, becomes a series of long, parallel tubes the length and diameter ..

Keywords: tower

Contact Delta Cooling Towers

Email

Print this page

Other products and services from Delta Cooling Towers

09-12-2011

Packaged Cooling Systems | Manufacturers of Cooling Towers, Cooling Systems and Air Strippers by Delta Cooling Towers, Inc

Delta's SXS (Shell & Tube Heat Exchanger System) consists of a common skid with the following components skid mounted: Pump, Shell & Tube Heat Exchanger, Control Panel, Pre-Wiring of skid components to Panel, and pre-piping of necessary components. Storage Tank, Pump, Control Panel, Pre-wiring of skid components to Panel, and pre-piping of all necessary components.


09-12-2011

Cooling Towers | Manufacturers of Cooling Towers, Cooling Systems and Air Strippers by Delta Cooling Towers, Inc

These towers use the same unitary seamless engineered plastic construction that Delta has been manufacturing since 1997, and have been very well received in both commercial and industrial applications. Premier™ Cooling Towers Delta's Premier™ induced draft, counter flow, low profile design is available in single module capacities from 250 to 500 cooling tons.


09-12-2011

Closed-Circuit Cooling Systems | Manufacturers of Cooling Towers, Cooling Systems and Air Strippers by Delta Cooling Towers, Inc

This prevents the cooling water from picking up particles that may not get filtered or even dissolved gases. Closed-loop cooling requires more energy and has higher initial and life-cycle costs than .. Whereby the process water for cooling does not come in contact with the atmospheric air.