Closed-Circuit Cooling Systems | Manufacturers of Cooling Towers, Cooling Systems and Air Strippers by Delta Cooling Towers, Inc

By: Delta Cooling Towers  09-12-2011
Keywords: Cooling

Certain processes require a closed-loop, whereby the process water for cooling does not come in contact with the atmospheric air.  This prevents  the cooling water from picking up particles that  may not get filtered or even dissolved gases.  Closed-loop cooling requires more energy and has higher initial and life-cycle costs than ..

Keywords: Cooling

Contact Delta Cooling Towers

Email

Print this page

Other products and services from Delta Cooling Towers

09-12-2011

Packaged Cooling Systems | Manufacturers of Cooling Towers, Cooling Systems and Air Strippers by Delta Cooling Towers, Inc

Delta's SXS (Shell & Tube Heat Exchanger System) consists of a common skid with the following components skid mounted: Pump, Shell & Tube Heat Exchanger, Control Panel, Pre-Wiring of skid components to Panel, and pre-piping of necessary components. Storage Tank, Pump, Control Panel, Pre-wiring of skid components to Panel, and pre-piping of all necessary components.


09-12-2011

Environmental Products | Manufacturers of Cooling Towers, Cooling Systems and Air Strippers by Delta Cooling Towers, Inc

Wet Scrubbing is the industry standard for the treatment of odors prior to releasing the air stream to atmosphere, because it is the most cost effective when considering initial operating and maintenance costs. Delta has provided innovative and economical air stripping solutions to more than 500 installations since our first Air Stripping Tower was delivered over 25 years ago in 1981.


09-12-2011

Cooling Towers | Manufacturers of Cooling Towers, Cooling Systems and Air Strippers by Delta Cooling Towers, Inc

These towers use the same unitary seamless engineered plastic construction that Delta has been manufacturing since 1997, and have been very well received in both commercial and industrial applications. Premier™ Cooling Towers Delta's Premier™ induced draft, counter flow, low profile design is available in single module capacities from 250 to 500 cooling tons.