Custom Safety Products, Inc. - Safety Pad II Fire Test

By: Custom Safety Products  09-12-2011
Keywords: safety products, Steel Studs, Custom Safety Products

Test Conducted By: Sintef NBL, Norwegian Fire Research Laboratory, Trondheim, Norway

Task No.: 250010.40/92.238

Test Method: NT Fire 007 - NS - INSTA 414

Intention of Test: Approval

Product: Marine Flooring System

Product Name: Safety Pad II(FR)

Manufacturer: Custom Safety Products Inc., USA

Product Description: Safety Pad II is molded from a high-strength, chemical resistant, urethane, equipped with steel studs in thickness approximately 32mm; weight approximately 35 kg/sq. meter.

Sampling: Samples taken by client.

Evaluation: The product satisfies the requirements regarding floorings in Class G. The product satisfies the requirements regarding approval of floorings by Det Norske Veritas.

Keywords: Custom Safety Products, safety products, Steel Studs,

Other products and services from Custom Safety Products

09-12-2011

Custom Safety Products, Inc. - Safety Pad II Diesel Absorption Test

At the start and at weekly intervals of the testing period sample weights were recorded and the differences compared to determine the affects of solubility in a hydrocarbon environment. We have completed evaluation of the urethane polymers CS-100FR and a leading competitor's mat sample for absorption and durability in the presence of common diesel fuel.


09-12-2011

Custom Safety Products, Inc. - Safety Pad III FR

This high-traction work surface is custom molded 1" thick to fit the rotary table, drill floor, and any other critical work or walk area. Safety Pad III FR is now offered in a high or low profile version for applications not requiring the stainless steel studs or grooves. Safety Pad III FR is molded from a high strength, fire retardant and chemical resistant urethane.


09-12-2011

Custom Safety Products, Inc. - Safety Pad II Dielectric Test

The scope of work was limited to conducting a Dielectric Proof test on the samples and providing a factual report of the results. This report presents the results of Dielectric tests conducted on 9 samples of polymer blocks. Electrodes were machined from Brass round stock to a diameter of 1 inches. 3/4", CS-100, yellow, studs, CS-200 non skid, CS-300 top coat. The voltage was increased slowly to 25,000 VDC.


09-12-2011

Custom Safety Products, Inc. - Safety Pad II FR

Drainage grooves are molded into the surface of the 1 1/4" mats to assist in the control of fluids that can accumulate during drilling operations and all pads come standard with a non-skid coating for additional traction and durability. The Safety Pad II FR is molded from a high strength, fire retardant and chemical resistant urethane with stainless steel studs protruding from its non-skid surface.