Our services include:
- multi-family units
- specialty finishes
- airless sprayers
- pot sprayers
- spray stain
- walkthrough check sheets
- touch up kits
- company letter to new home owner
- serviceman at final walkthrough
- off site painting
- on site painting
- custom homes
Quality and Service Our Procedures
The quality starts with primer, all our walls have three coats of product.
we sand between coats and use a light to check the walls for deficiencies.
we spray all of the trim and woodwork in the unit, this also gets three coats
all woodwork is caulked and all brad nail holes get filled 2 times to ensure
that most holes are invisible. Attention to detail is our mainstay, crisp cut in
lines and color division is high on our list.
We roll the prime coat on all walls.
Primer usually is tinted to the color if it is available.
1 day should be scheduled for priming,
if we have more time we could cut and roll the first coat as well
but it is not necessary.
Check list to be completed including workmanship of drywall.
At this time the dry wall crew should come back and do deficiencies
After the finisher is complete
we prep and spray all doors, trim and casing
attic access panel
handrails (if available,)
pre paint uninstalled base if available or needed,
apply first coat in unit,
finish all closets
after first coat is applied. We will repair any damage to drywall caused by construction.
Checklist is completed to ensure quality