Coating Removal | The Farrow System

By: Cold Jet  09-12-2011

Patented Coating Removal Systems

The Farrow System® is a revolutionary, cost effective, and environmentally safe surface cleaning and preparation method that incorporatea HEAT to quickly remove coatings, oxidation, dirt, and graffiti from most surfaces without damaging them.

The Farrow System® will clean surfaces that are impossible to clean using any other method, and at speeds that will leave you amazed! It will remove the toughest coatings, yet is easily adjusted to clean the most fragile surfaces without damage. From removing corrosion on a battleship to the printed label on an aluminum soda can, The Farrow System® does it all!

Operating The Farrow System® is as easy as washing your car. No special skills are required to begin cleaning. After a short learning period, an operator can achieve a wide range of cleaning finishes by making minor adjustments to the air pressure, water distribution and Farrow System® media. Operators have a full 180 degree view of the surfaces being cleaned through the vapor-like cleaning stream.



Designed with smaller projects in mind, the F250MAX is an ultra-compact machine with all the rugged reliability of our larger units. With a pot capacity of 4 bags of media, this unit will operate for 3-4 hours without refilling. This is perfect for smaller applications that only take a short time to complete, and will save you money by using smaller amounts of media needed for smaller jobs. The F250 MAX can operate with 100CFM - 250CFM of air supply. It has a 75 gallon water tank for hours of continuous operation without connecting to a water source.



This is the workhorse of our stand alone machine line. With a pot capacity of 6 bags of media, this unit will operate for 5-6 hours without refilling. This is the optimal capacity for most applications requiring continuous efficient cleaning of larger surfaces such as buildings and infrastructure. It is sized to make placement easy on the jobsite by forklift or hoisting. The F450MAX can operate with 100CFM - 250CFM of air supply. The F450MAX is equipped with a 75 gallon water tank which gives hours of continuous operation without connecting to a supplemental water supply



This unit is engineered for big production with blasting capability of up to 125psi. With a pot capacity of 8 bags of media, this unit will operate for 6-7 hours without refilling. This allows you to efficiently clean very large projects such as industrial, marine, and municipal infrastructure quickly and with minimal downtime for refilling. And even though it has big capacity, the F650MAX is still compact for easy hoisting or forking into place. The F650MAX can operate with 250CFM - 400CFM of air, standard or high pressure. The F650MAX is equipped with a 75 gallon water tank which gives hours of continuous operation without connecting to a supplemental water supply.



The Farrow 185® travels to any jobsite. The Farrow 185 is a trailer mounted, fully self-contained machine with a 110 gallon water supply. Powered by the ultra-reliable Airman 185 CFM diesel air compressor, The Farrow 185 efficiently cleans large projects, can easily be towed behind a light truck, and is compact to get close to the job. This model is made for the power user who needs high mobility.



© 2011 Farrow System USA, All Rights Reserved
Product information on this page is the copyright of Farrow System USA, West Chester, PA


Contact Cold Jet

Email - none provided

Print this page

Other products and services from Cold Jet

09-12-2011

Cold Jet - Dry Ice Blasting Products

With cleaning performance that's twice as fast as other pneumatics, and a pulse-free stream that cleans uniformly on every pass, the C100 is like no pneumatic machine you've seen before. Couple that with automated hopper agitation and the ability to double your hose length from previous pnuematics and the Aero C100 will let you clean in locations never before possible.


09-12-2011

Cold Jet - Dry Ice Production Products

Cold Jet's R3000 Pellet-to-Slice Reformer is fully automatic, with the flexibility to reform 1/8" to 3/4" dry ice pellets or nuggets into 6" x 6" or 5" x 8" slices. The pellet-to-slice reforming process eliminates hazards from cutting blocks and reduces CO2 sublimation loss by approximately 80% - producing less CO2 "smoke..


09-12-2011

Dry Ice Production Equipment - Cold Jet

The P325 Pelletizer offers automatic production capability of up to 300 lbs of dry ice per hour and is upgradeable to the P650, doubling capacity to 600 lbs per hour. When in full slice mode this system can reform 1/8" pellets into 6" x 6" or 5" x 5" dimensions, up to 300 slices per hour. This system comes with a choice of dies to produce 3 mm high-density pellets, or 6 mm, 9 mm, 13 mm, and 16 mm nuggets.