Tank Washing Nozzles, High Impact Washing, Clean In Place, HydroWhirl Poseidon PTFE Tank Washing Spray Nozzles

By: Bete Fog Nozzle  09-12-2011
Keywords: Nozzle, Spray Nozzles, Spray Nozzle

The HydroWhirl PoseidonTM is a versatile Clean-In-Place (CIP) rotating tank-washing nozzle that combines slow moving rotation and high-impact spray pattern for more efficient cleaning. It is ideal for tanks up to 22 ft. in diameter often found in the food, beverage, chemical and pharmaceutical industries where superior cleaning with reduced cycle times and low water, energy and chemical consumption are important considerations.

The bearingless design provides a slow, nearly constant rotation speed over the operating pressure range. The slow, nearly constant rotation speed of the HWP results in more efficient cleaning and use of resources over static spray balls and other rotating spray ball designs through increased impact and longer spray dwell time on the target surface.

Advantages of the HydroWhirl Poseidon Tank Washing Spray Nozzles:

  • Cleans more quickly and uses less water and lower pressure than static tank washers
  • Complete 360° omnidirectional coverage
  • Slow rotation speed provides higher impact and more efficient cleaning.
  • Durable PTFE nozzle construction withstands extreme chemical and elevated temperature environments.
  • Simple internal design allows reliable flow-through operation
  • Design validated by lab testing to 200°F (93°C)
  • Maintenance-friendly design allows disassembly, inspection, and reassembly with basic hand tools.
  • Made from FDA-approved materials for use in Clean-in-Place (CIP) applications

Design Features of the HydroWhirl Poseidon Tank Washing Spray Nozzles:

  • Cleans more quickly, and uses less water and lower pressure than static tank washers
  • PTFE construction:
    - Ideal for harsh chemical environments
    - Corrosion resistant
  • Three connections: pipe, tube, or DIN clip-on. Threaded connections available upon request.
  • Made from FDA-approved materials for use in Clean-In-Place (CIP) applications.
SPRAY CHARACTERISTICS
  • Slow spinning, longer spray dwell time on the target surface increases impact over conventional rotating designs
  • Complete 360° omnidirectional spray pattern

Flow rates: 15.3 to 89.5 gpm (58.3 to 333 L/min)

Minimum Tank Opening: Small: 3" (75mm), Large: 3.3" (83mm)

Made in the U.S.A.

BETE Fog Nozzle, Inc. has been a pioneer in spray nozzle engineering, manufacturing, and applications for over 55 years. BETE spray nozzles are used throughout the food processing and pharmaceutical industries. BETE Applications Engineering will work with you to help during trial runs and ensure you choose the optimal spraying solution.

Keywords: Nozzle, Spray Nozzle, Spray Nozzles, Spray Pattern, Tank Washing

Contact Bete Fog Nozzle

Email

Print this page

Other products and services from Bete Fog Nozzle

09-12-2011

MaxiPass (MP) Full Cone Nozzles - Clog Resistant Nozzles

Custom MaxiPass Solutions: Petroleum Processing: Petroleum Processing: Refining/Chemical Processing: Chemical Processing: Chemical Processing: Petroleum Processing: Petroleum Processing: Petroleum Processing: Petroleum Processing. Spray Characteristics of the MaxiPass Full Cone, Clog Resistant, and Fire Protection Nozzle. The spray angle of wide and medium angle whirl nozzles is affected by increasing pressure.


09-12-2011

Custom Spray Lances, Injection Quills, Injectors

These dual-nozzle lances were custom designed and manufacturedwith special weld procedures and unusual nozzles, all on an expeditedbasis to meet the demanding schedule of a petroleum refinery outage. Custom BETE Spray Lance Solutions.


09-12-2011

TF Nozzles - Spiral Spray Nozzles - Fogging Nozzles - Misting Nozzles

Spray Characteristics of the TF Spiral Spray, Fogging, Misting, and Evaporative Cooling Nozzle. Male connection standard; female connection available by special order. The original spiral nozzle invented by BETE. Wide range of flow rates and spray angles.


09-12-2011

Tank Washing Nozzles, High Impact Washing, Clean In Place, HydroWhirl Orbitor Spray Nozzles

Orbitor is a versatile tank cleaning machine designed to meet the high standards required in the food, brewing, beverage, dairy, and chemical industries combining high performance cleaning efficiency with extended operating life and reduced life cycle costs. The HydroWhirl Orbitor can be stripped, maintained, and rebuilt in less than 15 minutes. Food and Dairy Raw milk storage, spray driers, process vessels, storage silos.