Slide Longboards | Trucks | Bear Grizzly

By: Slide Longboards  09-12-2011

A great all round truck, whether your commuting, cruising, or going fast down hills.  The 2010 Grizzly's are a completely gutted, redesigned version of the already great Bear Grizzly's. All the goods of the 2009's are still here, including the sweet-spot 181mm axle width, flipable hanger for cruising and bombing options, and a baseplate shape/hole pattern to mount to just about any board out there today including drop-through's.

The new stronger and lighter 2010 design has been fine tuned to fit any standard 24mm diameter bushing on top or bottom. The baseplate and hanger turn at 52 degrees whatever setup, but the positive (standard) and negative (flipped) leverage axle placement helps you change your setup from general carving to a stable hill bombing machine in seconds. The new geometry and bushing seats will give you the best combination of lean, rebound, and response possible. The axles are heat treated, so the chance of you bending an axle is greatly reduced.  Basically..you'll never want to ride another set of longboard trucks after you try these.

Hardware to mount to the board is sold seperately

Price: $52.00

The information in this article was current at 06 Dec 2011


Other products and services from Slide Longboards

09-12-2011

Slide Longboards | Trucks | Bear Smokey

In order to reduce as much unwanted play as possible within the truck, the Smokey uses spherical bearings at both pivot points. The precision CNC manufacturing process leaves the Smokey straight and true, not to mention looking completely badass. The 10mm axle uses a 9/16ths nut so you only need one wrench for you trucks. Precision 10mm axles in line with the king pin create a low, stable ride.