No Sweat Spray

No Sweat Spray from Robson Thermal Mfg. Ltd.

By: Robson Thermal Mfg. Ltd.  20-02-2015
Keywords: Sweating, Condensation, Prevent Condensation

No Sweat Spray, anti-condensation paint in a handy aerosol spray can. Saves time and money for plumbers, pipe insulators, and plant maintenance staff: - white colour, can be painted any colour or covered with any material - solvent based - installed cost is 80% to 90% less than fixed or removable insulation on cold pipe fittings such as valves, pumps, unions, cold water meters, pipe supports, gauge stems, and strainers - qualifies for LEED points - comes in standard 15 ounce aerosol spray cans - can be applied directly onto metal surfaces that are rusted (it encapsulates existing rust and prevents new rust from starting or spreading) - does not need any primer - apply like any other aerosol spray paint - freeze/thaw stable - approximate coverage is 16 sq.ft. per can at 1.6 mm (1/16") total thickness - best suited for small or irregular surfaces up to 120'F such as valves on cold pipe systems, water meters, chilled water pumps and strainers, pipe and duct hangars, small diameter short runs of piping, pipe fittings on cold pipe systems, etc. - use No Sweat Spray to finish and seal raw pipe insulation bevels on cold piping systems - use No Sweat Spray to paint cold pipes and fittings to prevent existing rust from getting worse, or prevent rust from starting (this solves an expensive problem at Domestic Cold Water entry stations and Chilled Water Pump stations that rust out and have to be re-piped) - shelf life of No Sweat Spray is 2 years

Keywords: Condensation, Prevent Condensation, Prevent Sweating, Sweating,

Contact Robson Thermal Mfg. Ltd.

Email

Print this page

Other products and services from Robson Thermal Mfg. Ltd.



02-03-2011

No Sweat-FX anti-condensation paint, prevents condensation

No Sweat-FX has been used to prevent condensation on cold surfaces since 1992 including on cold water pipes and tanks,


02-03-2011

Flamex FR Canvas, fire rated canvas jacket for covering mechanical insulation

Flamex FR Canvas is a 6 ounce canvas jacket for covering mechanical insulation with features: - treated with non-toxic fire


09-11-2010

Adhesives, coatings, sealants, and canvas jacket for mechanical insulation & HVAC trades

Flamex FR Canvas (25/50 Fire Rated) - fire resistant 6 ounce canvas for covering mechanical insulation indoors - plain weave


Manufacturer of adhesives, coatings, canvas jacket, duct seal for Mechanical Insulation & HVAC from Robson Thermal Mfg. Ltd. thumbnail
09-11-2010

Manufacturer of adhesives, coatings, canvas jacket, duct seal for Mechanical Insulation & HVAC

Robson’s Brushes (Throw-Away ‘Chip’ Brushes For Glue, Duct Sealant, Coatings, Lagging, Mastic, and Grease) - our ‘chip’ brushes (1" to