Waterproofing & Reinforcement

Waterproofing & Reinforcement from Canadian Induracoat Corporation

By: Canadian Induracoat Corporation  19-05-2012
Keywords: Waterproofing, industrial, Secondary Containment

Tank Liners, Bed Liners, Pond Liners & more. Polyurea lining technology boasts excellent chemical resistance to many liquids with high build thickness characteristics, rapidly drying finishes and very low perm ratings.

Polyurea is ideal for use in a variety of waterproofing, corrosion control, immersion and lining applications. It can be applied over a variety of different substrates, including concrete, metals, and wood, ) and in a wide range of temperature and humidity environments. Polyurea also offers excellent adhesion to properly prepared surfaces and is an outstanding alternative to traditional systems such epoxy, polyurethane, fiberglass and other mat reinforced lining systems.

Polyurea coatings combine high tensile strength and elongation properties with low permeability and high impact resistance, making them ideal where a tough, flexible liner is required.

Polyurea is also used extensively in the water and wastewater industries and are ideal liners for most water tanks, including salt water. Many of the world's sea aquariums have turned to polyurea lining technology due to its fast set return to service characteristics, ability to achieve UV stable colors, and its superior physical properties over conventional linings. Polyurea can even withstand most chemical gasses produced at waste treatment plants.

Polyureas are also recommended for lining large diameter pipes, manholes, clear wells and process tanks for potable water and non-potable water, basins and reservoirs, lift stations and reserve fire water tanks. For primary and secondary containment, Polyurea is fast becoming the material of choice for solving the most difficult industrial scenarios.

Polyureas contain no VOC’s and have easy “environmental” disposal which adds greatly to the cost benefits and “Green” contribution.

Keywords: industrial, Polyurea, Reinforcement, Secondary Containment, Waterproofing

Contact Canadian Induracoat Corporation

Email

Print this page

Other products and services from Canadian Induracoat Corporation

VersaFlex Polyurea Protective Coatings from Canadian Induracoat Corporation thumbnail
19-05-2012

VersaFlex Polyurea Protective Coatings

Polyurea coatings are eco-friendly, non-toxic, and contain no VOCs or solvents. In fact, many Polyurea coatings are NSF/ANSI 61 certified for use in potable water storage applications.


Insulation & Flotation from Canadian Induracoat Corporation thumbnail
19-05-2012

Insulation & Flotation

Spray Polyurethane Foam, commonly known as SPF, is derived from the reaction of an isocyanate component and a polyol resin component. When the two liquids are combined, a chemical reaction occurs which creates a rigid or semi-rigid foam.


Protective Industrial Coatings from Canadian Induracoat Corporation thumbnail
18-05-2012

Protective Industrial Coatings

Induracoat specializes in the application of Polyurea coating sprays used to protect against abrasion, corrosion, vibration and impact stresses for primary containment - secondary containment, tank linings, pond & water feature linings, industrial flooring & roofing, amongst others.