TEXTURESTONE - Ecolink Products Group

By: Ecolink Group  09-12-2011
Keywords: Foam, Green Building, foam insulation

TextureStone is a water-based, modified polymer, mixed with recyclable materials.  This unique product is designed for interior and exterior applications as a non-slip/decorative coating for floors, decks and walls.  TextureStoneaheres well to a wide range of substrates including:  concrete, wood, metal, foam, drywall, arborite, laminates and vinyl.  Application of TextureStone is fast and efficient, using a low pressure sprayer (Marshalltown Enforcer or equivalent). TextureStone provides excellent weather protection, 100% UV stability and water resistance.  A wide range of surface finishes are available including: non-slip flooring/decking, textured walls, simulated stucco, faux brick/tile.

PRIMARY APPLICATIONS:
  • Non-Slip Flooring
  • Decorative Flooring
  • Decorative Coatings
  • Coating for ICF and foam insulation
  • Wall Coatings – Interior/Exterior
  • Decks, Walkways, Patios
  • EIFS (Exterior Wall Insulation Finishing System)
KEY ADVANTAGES
  • Green Building Technology – Made from Recyclables and Renewable Resources
  • Efficient to Apply using a low pressure sprayer (Marshalltown Enforcer or equivalent
  • Available in Various Surface Finish Textures
  • Wide Range of Colors
  • Excellent Adhesion to a Wide Range of Substrates: concrete, metal, wood, masonry, vinyl, etc
  • 100% UV Stable
  • Water Resistant and Breathable
  • Superior Wear Characteristics
  • Fire Resistant
  • Excellent Chemical Resistance
  • No VOC’s
  • Low Odor
  • Meets USDA, FDA and CFIA Requirements for use in Regulated Food Facilities
  • Not Regulated per USDOT Shipping Regulations
  • Packaged in Convenient Pre-Measured Kits
  • Low Maintenance
  • LEED Compliant

Keywords: chemical resistance, Decorative Flooring, Foam, foam insulation, Green Building, Pressure Sprayer, Shipping Regulations,

Other products and services from Ecolink Group

09-12-2011

ECO PRO-HB - Ecolink Products Group

ECO PRO-HB is available in both rollable and low pressure spray versions and can be formulated with a special anti-graffiti additive. ECO PRO-HB provides superior chemical and wear resistance and may be applied at temperatures ranging from 30°F to 120°F. ECO PRO-HB is a two component, 100% solids, aliphatic polyurea, designed as a high-build, UV stable seal coat.


09-12-2011

ECO METALLIC - Ecolink Products Group

ECO Metallic exhibits fast cure time, excellent adhesion and wear characteristics, water insensitivity and chemical resistance. ECO Metallic is a rapid cure, 100% solids epoxy coating, designed for decorative and heavy-duty applications. This environmentally friendly epoxy has no VOC’s, emits virtually no odors. Not Regulated per USDOT Shipping Regulations – Class 55. Non-Slip Floor and Deck Coatings.


09-12-2011

ECO PRO-WB - Ecolink Products Group

It adheres well to a wide range of substrates including concrete, metal, wood, brick and masonry. ECO PRO-WB may be applied with squeegee and roller, or low pressure spray unit. ECO PRO-WB is a two component, water-based, aliphatic polyurea sealer.


09-12-2011

ECO PRIME - Ecolink Products Group

It offers excellent adhesion to a wide range of materials, including wood, metal, concrete, masonry and tile. ECO Prime is a single component, water-based, epoxy primer for use on most rigid or flexible substrates. It is easy to apply with roller or airless sprayer and it dries in minutes. ECO Prime contains no VOC’s and is low odor.


09-12-2011

ECO EPOXY - Ecolink Products Group

ECO Epoxy exhibits fast cure time, excellent adhesion and wear characteristics, water insensitivity and chemical resistance. ECO Epoxy is a rapid cure, 100% solids epoxy coating, designed for heavy duty industrial applications. FDA and CFIA requirements for indirect food contact and can be used indoors with minimal disturbance. This environmentally friendly epoxy has no VOC’s, emits virtually no odors. Non-Slip Floor and Deck Coatings.


09-12-2011

ECO PRO - Ecolink Products Group

ECO PRO is available in both rollable and low pressure spray versions and can be formulated with a special anti-graffiti additive. ECO PRO provides superior chemical and wear resistance and may be applied at temperatures ranging from 50°F to 120°F. ECO PRO is a two component, 100% solids, aliphatic polyurea, designed as a UV stable sealer. It adheres well to a wide range of substrates including concrete, metal, wood, and masonry.