ECO EPOXY - Ecolink Products Group

By: Ecolink Group  09-12-2011
Keywords: environmentally friendly, Industrial Flooring, chemical resistance

ECO Epoxy is a rapid cure, 100% solids epoxy coating, designed for heavy duty industrial applications.  ECO Epoxy exhibits fast cure time, excellent adhesion and wear characteristics, water insensitivity and chemical resistance. This environmentally friendly epoxy has no VOC’s, emits virtually no odors.  It meets USDA, FDA and CFIA requirements for indirect food contact and can be used indoors with minimal disturbance.  ECO Epoxy can be applied at temperatures ranging from 40° F to 120° F. ECO Epoxy cures to a glossy smooth finish; it may be broadcast with aggregate to provide a non-slip surface.

PRIMARY APPLICATIONS:
  • Industrial Flooring
  • Non-Slip Floor and Deck Coatings
  • Chemical Resistant Coatings
  • Heat Resistant Coatings
  • Food Facility Coatings
  • Bottling Plants
  • Warehouses and Supply Depots
  • Maintenance and Repair Facilities
  • Military Applications
  • Aircraft Hangers and Decks
KEY ADVANTAGES
  • Rapid Cure – Foot Traffic in 8 Hours or Less
  • Excellent Adhesion to a Wide Range of Substrates:  concrete, metal, wood, masonry, etc.
  • Superior Wear Characteristics
  • Resists Cracking – 28% Elongation
  • Excellent Chemical Resistance
  • Non-Slip or Smooth Finish
  • No VOC’s
  • Low Odor
  • Wide Temperature Application Range:  40° – 120°F
  • Meets USDA/FDA/CFIA Requirements for Indirect Food Contact
  • Not Regulated per USDOT Shipping Regulations – Class 55
  • Low Maintenance
  • LEED Compliant

Keywords: chemical resistance, Deck Coatings, environmentally friendly, Industrial Flooring, Shipping Regulations

Other products and services from Ecolink Group

09-12-2011

ECO PRO-HB - Ecolink Products Group

ECO PRO-HB is available in both rollable and low pressure spray versions and can be formulated with a special anti-graffiti additive. ECO PRO-HB provides superior chemical and wear resistance and may be applied at temperatures ranging from 30°F to 120°F. ECO PRO-HB is a two component, 100% solids, aliphatic polyurea, designed as a high-build, UV stable seal coat.


09-12-2011

ECO METALLIC - Ecolink Products Group

ECO Metallic exhibits fast cure time, excellent adhesion and wear characteristics, water insensitivity and chemical resistance. ECO Metallic is a rapid cure, 100% solids epoxy coating, designed for decorative and heavy-duty applications. This environmentally friendly epoxy has no VOC’s, emits virtually no odors. Not Regulated per USDOT Shipping Regulations – Class 55. Non-Slip Floor and Deck Coatings.


09-12-2011

ECO PRO-WB - Ecolink Products Group

It adheres well to a wide range of substrates including concrete, metal, wood, brick and masonry. ECO PRO-WB may be applied with squeegee and roller, or low pressure spray unit. ECO PRO-WB is a two component, water-based, aliphatic polyurea sealer.


09-12-2011

ECO PRIME - Ecolink Products Group

It offers excellent adhesion to a wide range of materials, including wood, metal, concrete, masonry and tile. ECO Prime is a single component, water-based, epoxy primer for use on most rigid or flexible substrates. It is easy to apply with roller or airless sprayer and it dries in minutes. ECO Prime contains no VOC’s and is low odor.


09-12-2011

ECO PRO - Ecolink Products Group

ECO PRO is available in both rollable and low pressure spray versions and can be formulated with a special anti-graffiti additive. ECO PRO provides superior chemical and wear resistance and may be applied at temperatures ranging from 50°F to 120°F. ECO PRO is a two component, 100% solids, aliphatic polyurea, designed as a UV stable sealer. It adheres well to a wide range of substrates including concrete, metal, wood, and masonry.


09-12-2011

TEXTURESTONE - Ecolink Products Group

A wide range of surface finishes are available including: non-slip flooring/decking, textured walls, simulated stucco, faux brick/tile. This unique product is designed for interior and exterior applications as a non-slip/decorative coating for floors. Excellent Adhesion to a Wide Range of Substrates: concrete, metal, wood, masonry, vinyl, etc. Application of TextureStone is fast and efficient, using a low pressure sprayer.