Knowledge Base

By: Esecuredata  09-12-2011

The Problem
In some versions of Windows, servers fail to navigate to the Microsoft site for either browsing or updates.

The Diagnosis
It turns out this is usually due to the DNS Client failing to properly cache the Microsoft site’s DNS information.

The Solution
DNS Client is a service that caches Domain Name System (DNS) names for the computer it’s enabled on. If disabled, it simply means the system will go upstream to resolve DNS names rather than use the cache.
Disabling this service usually results in the server being able to properly access the Microsoft site.

You can enable or disable this service by going to:

Start – Control Panel – Administrative Tools – Services


Other products and services from Esecuredata

09-12-2011

Knowledge Base - knowledge base

If both hard drives have the same Volume Group, you will need to rename one of them with the following commands. Device Boot Start End Blocks ID System/dev/sda1 * 1 13 104391 83 Linux/dev/sda2 14 60801 488279610 8e Linux LVM. PV /dev/sdb2 VG VolGroup00 lvm2 PV /dev/sda2 VG VolGroup00 lvm2 Total: 2 / in use: 2 / in no VG: 0. To view attached drives to see which ones need mounting use the following command.


09-12-2011

Press Releases

Our custom server racks permit unparalleled airflow while giving technicians ease of access to all replaceable components, allowing us to recover from individual hardware component failure faster than competitive services. With no-cost SSD upgrades, built-in permanent KVM/IP units, and unmetered bandwidth, these are by far the fastest dedicated servers we’ve ever offered.