LabTest - EMC Testing Services

By: Labtest Certification  09-12-2011
Keywords: Electro, Testing Facility, Emc Testing

For specialized and automotive component testing, LabTest is able to conduct radiated immunity testing up to 75 v/m, depending on the physical size of the component under test.

With our 0-600 V, 50/60Hz, 1/3 phase power source, LabTest provides manufacturers of commercial/industrial components and end products a reliable indoor testing facility capable of operating 24/7.

EMC Testing Standards:

LabTest can evaluate your products to the following list of standards in their Vancouver test facility:

  • CISPR 22: Information technology equipment — Radio disturbance characteristics — Limits and methods of measurement
  • CISPR 11: Industrial, scientific and medical (ISM) radio-frequency equipment — Radio disturbance characteristics — Limits and methods of measurement
  • CISPR 24: Information technology equipment — Immunity characteristics — Limits and methods of measurement
  • EN 55011: Industrial, scientific and medical (ISM) radio-frequency equipment — Radio disturbance characteristics — Limits and methods of measurement
  • EN 55022: Information technology equipment — Radio disturbance characteristics — Limits and methods of measurement
  • EN 55024: Information technology equipment — Immunity characteristics — Limits and methods of measurement
  • ENV 50204: Magnetic field immunity
  • IEC/EN 60945: Emissions & Immunity for Marine Applications
  • IEC/EN 61000-3-2: Harmonics
  • IEC/EN 61000-3-3: Flicker
  • IEC/EN 61000-4-2: Electro static discharge
  • IEC/EN 61000-4-3: Radiated frequency immunity
  • IEC/EN 61000-4-4: Electrical fast transients
  • IEC/EN 61000-4-5: Surge
  • IEC/EN 61000-4-6: Conducted frequency immunity
  • IEC/EN 61000-4-8: Magnetic field immunity
  • IEC/EN 61000-4-11: Voltage dips and interruptions
  • IEC/EN 61000-6-1: Immunity for residential, commercial and light-industrial environments
  • IEC/EN 61000-6-2: Immunity standard for industrial environments
  • IEC/EN 61000-6-3: Emission standard for residential, commercial and light-industrial environments
  • IEC/EN 61000-6-4: Emission standard for industrial environments
  • ICES-003: Emissions
  • FCC Part 15: Intentional Radiators
  • FCC Part 15: Unintentional Radiators
  • FCC Part 18: ISM Equipment

Laboratory Capabilities:

  • Radiated susceptibility/immunity electric fields 10 kHz through 1.0 GHz up to 75 V/meter[m4] with AM, FM or pulse modulation (sample size restrictions apply)
  • Radiated susceptibility/immunity electric fields 1GHz through 2.5 GHz up to 10 V/meter with AM, FM or pulse modulation
  • Radiated susceptibility/immunity magnetic fields 45 Hz through 1000 Hz[m5]
  • Conducted susceptibility 10 kHz through 230 MHz with AM, FM or pulse modulation
  • Radiated emissions electric field 9 kHz through 4 GHz
  • Radiated emissions magnetic field 9 kHz through 100 kHz[m6]
  • Conducted emissions 9 kHz through 30 MHz[m7]
  • EFT pulse generation up to 4,400 V
  • Surge pulse generation up to 6,600 V
  • Electrostatic discharge (ESD) up to 16,000 V
  • Power line harmonic current emissions (loads up to 300 Vac and 1750 VA)
  • Power line voltage fluctuations (flicker) (loads up to 300 Vac and 1750 VA)
  • [m8] Power line voltage dips and interruptions (16A AC current max)[m9]
  • AC power source single phase (other than 60 Hz) 45 Hz to 500 Hz up to 600 Vac and loads up to 4,500 VA
  • AC power source three phase (other than 60 Hz) 45 Hz to 550 Hz up to 480 Vac and loads up to 3,500 VA
  • DC power source 0 to 42 Vdc up to 20 A
  • Troubleshooting/design guidance
  • Field consulting and Testing

Electrical/Electronic Products to be affixed with the CE Marking must satisfy the requirements of the EMC Directive for the European Union.

FCC Part 15 is the most commonly used requirement for electrical electronic devices for both intentional and unintentional radiators

In Canada, Industry Canada is the responsible agency for "Spectrum Management and Telecommunications"

The 2 most commonly used standards are:

Keywords: Electro, Emc Testing, Information Technology Equipment, Testing Facility,

Contact Labtest Certification

Email

Print this page

Other products and services from Labtest Certification

09-12-2011

Wheel Mark, DNV, Lloyd’s, ABS, BV Marine Certification Services

Our extensive network and experience in the Marine Industry offers clients easy access to the CE Mark, Classification Agency Type Approval and the Wheel Mark for the Marine Equipment Directive. With our established network with classification agencies, we can help you get your desired classification.Following is a list of a few classification agencies we work with.


09-12-2011

LabTest - Environmental Testing Services

With the harmonization of national and international standards, environmental requirements are becoming more and more mandatory for all product categories. LabTest provides manufacturers testing services for evaluating their products for various environmental conditions. Dust Blowing Chambers as per MIL-STD-810. Settling Dust Chamber as per MIL-STD-810.


09-12-2011

LabTest - Safety Testing Services

Certification has a legal connotation signifying that a third party organization has put its stamp of approval on the outcome and has, in a sense, guaranteed the products meet the conditions of the test. This has a significant risk factor to the certifying entity, and should only be done when the benefits outweigh the risks. LabTest is able to provide you with testing and certification services to the UL and CSA standards for North America.


09-12-2011

CB Scheme, IEC Standards, CE Marking, Directives, ATEX, IECEx International Approvals Services

North American manufacturers exporting their products to International Markets are faced with the challenges of language, cultural barriers and a very different set of regulatory conformity assessment requirements and procedures. Our one-stop solution approach to international approvals will help you to reduce time-to-market and cut your costs for fulfilling the compliance requirements.


09-12-2011

International Approvals, EMC Testing, Environmental Testing, CSA Certification, Safety & Marine Equipment Testing Services

Experienced professionals will handle all your needs for product testing and certifications to the proven and recognized standards, such as CSA, UL, EN, IEC. For organizations with global markets and multiple product categories, LabTest offers you a One-Stop-Solution for both Domestic and International Markets. As Your Partner in Certification, LabTest provides a quick, and cost effective route for your product approvals.


09-12-2011

LabTest - Quality Management Systems

ISO 9000 is the most commonly used international standard that provides a framework for a quality management system.The commonly know international standards used for specific industry are. ISO 9000 is a generic name given to a family of standards developed to provide a framework around which a quality management system can effectively be based.