SOC Robotics Products

By: Soc Machines  09-12-2011

Products

SOC Robotics offers products for the OEM, system integrator, software developer, hardware design house, research labs and education.  A unique approach to firmware integration ensures the quickest time to market with one of the highest performance embedded imaging product mixes in the industry.


SOC Robotics offers a family of high performance Embedded RISC/DSP  engines for Image and Video processing optimized for real time vision processing, monitoring and control.  The family includes low cost IP controllers for embedded web server automation to high performance DSP engines optimized for real time image/video processing running uCLinux.

             

 

SOC Robotics offers a family of embedded web servers using both 8 bit AVR processors and 16 ARM processors.  All software is open source providing maximum implementation flexibility.

    

 

The SOCVision family of Camera modules supports both NTSC and PAL analog video along with several digital video CMOS imaging adapters supporting VGA to 1.33MegaPixel format.  The SOCVision family is compatible with the P1 video expansion port.

 


Other products and services from Soc Machines

09-12-2011

SOC Robotics MC433 Stepper Motor Controller

A low current DC relay array capable of handling 24VDC at 2A or 120VAC at 0.4A, a high current relay array capable of handling 30VDC at 4A or 120VAC at 2A and a hybrid MOSFET controller that can be configured to control three small stepper motors or operate as 12 independent 2A 30V switches.


09-12-2011

SOC Robotics IMU6410 Sensor Platform

Overview The IMU6410 is a sophisticated MEMs sensor Inertial Measurement Unit platform with ten Degrees Of Freedom, onboard AVR processor, real time clock, external serial flash and USB interface. The accelerometer has a sensitivity of 4mG over the full 16G range, a bandwidth of 3500Hz 150Hz, non-linearity less than 1% and a cross-axis sensitivity less than 1%.


09-12-2011

SOC Robotics DOF10W Sensor

The accelerometer is oriented with the X+ on the long axis of the PCB toward Port A connector J1, Y+ on the short axis of the PCB toward Port B connector J2 and Z+ pointing up out of the board. The accelerometer has a sensitivity of 4mG over the full 16G range, a bandwidth of 3500Hz 150Hz, non-linearity less than 1% and a cross-axis sensitivity less than 1%.