ReceptorNet WaveGauge: Sensors

By: Receptornet Technologies  09-12-2011
Keywords: tank, Boat Or Rv

ReceptorNet offers a broad range of WaveGauge sensors for your boat or RV:

  • Measure fresh, grey, black, and live-well tank levels
  • Works with non-metallic tanks or your existing tank sender unit
  • Measures temperature and humidity
  • Displays likelihood of mold growth
  • Monitor bilge pump on/off cycles, cumulative run-time, and cycle run-time
  • Includes built-in non-mechanical high water alarm
  • Monitor house/accessory and starter battery banks
  • Displays easy-to-read percentage values

Sensors measure the raw data about your boat or RV's systems, and are each individually designed for a specific monitoring requirement. Each sensor unit has the ability to take multiple “measurements”. For example, the Bilge Sensor measures bilge pump activity and measures high water levels in your bilge.

WaveGauge sensors are designed to have an easy and non-invasive installation and are compatible with all SensorPlexes.

Monitor black, fresh, and grey water tanks with WaveGauge’s tank sensor. To monitor non-metallic tanks installation is a simple as adhering two foil pads to the outside of your tank – no sender units to install. With metal tanks, WaveGauge’s tank sensor is compatible with all standard US and European tank sender units.

Specifications:

Measurements: Tank level (adhesive capacitive pad)
Tank level (US or European tank level sender unit)
Dimensions (w x l x h): 2" x 1.5" x 1" (50.8mm x 38.1mm x 25.4mm)
Power: 10-30 volts DC
2 watts
Weight: 8 ounces
Mounting: 2 x mounting tabs
2 x 10-32 screws
Operating Temperature: 32 to 122°F (0 to 50°C)
Waterproofing: IP 67 (epoxy potted electronics)
Connectors: (to SensorPlex)
(to non-metallic tank)
(to tank sender unit)

Have you ever worried about mold growth in your boat or RV? WaveGauge’s Mold sensor can measure environmental conditions and help predict what the potential for mold growth is.

Specifications:

Measurements: Temperature
Humidity
Mold growth potential
Dimensions (w x l x h): 2" x 1.5" x 1" (50.8mm x 38.1mm x 25.4mm)
Power: 10-30 volts DC
2 watts
Weight: 8 ounces
Mounting: 2 x mounting tabs
2 x 10-32 screws
Operating Temperature: 32 to 122°F (0 to 50°C)
Waterproofing: IP 67 (epoxy potted electronics)
Connectors: (to SensorPlex)

It is easy to accurately measure bilge pump on/off cycles, run-time, and high water with the WaveGauge Bilge sensor. Once connected to your bilge pump, the bilge sensor records a count of bilge pump on/off cycles, cumulative run-time, and cycle run-time. To monitor bilge water levels, the bilge sensor uses two exposed terminals.  If water passes between both terminals an alarm will be triggered that notifies you by audible alarm or remote cellular phone text message. There are no moving parts to fail or become jammed.

Specifications:

Measurements: Bilge pump on/off cycles
Bilge pump cumulative run-time
Bilge pump cycle run-time
High water
Dimensions (w x l x h): 2" x 1.5" x 1" (50.8mm x 38.1mm x 25.4mm)
Power: 10-30 volts DC
2 watts
Weight: 8 ounces
Mounting: 2 x mounting tabs
2 x 10-32 screws
Operating Temperature: 32 to 122°F (0 to 50°C)
Waterproofing: IP 67 (epoxy potted electronics)
Connectors: (to SensorPlex)
(to bilge pump)
(to bilge high water zone)

WaveGauge’s battery/voltage sensor can measure up to 2 voltage sources by simply connecting the sensor to any powered wires. Use the battery sensor to easily monitor house and starter batteries.

Specifications:

Measurements: 2 x voltage
Dimensions (w x l x h): 2" x 1.5" x 1" (50.8mm x 38.1mm x 25.4mm)
Power: 10-30 volts DC
2 watts
Weight: 8 ounces
Mounting: 2 x mounting tabs
2 x 10-32 screws
Operating Temperature: 32 to 122°F (0 to 50°C)
Waterproofing: IP 67 (epoxy potted electronics)
Connectors: (to SensorPlex)
(to battery/voltage source)

Keywords: Boat Or Rv, tank,

Contact Receptornet Technologies

Email

Print this page

Other products and services from Receptornet Technologies

09-12-2011

ReceptorNet WaveGauge: Gateways

Maintain peace-of-mind when away from your boat or RV because WaveGauge's cellular gateway can send text message alerts to your cellular phone. With the PC gateway you can access your WaveGauge system using a laptop and set important configuration settings. Through the cellular gateway, WaveGauge is capable of sending text message alerts to your cellular phone.


09-12-2011

ReceptorNet WaveGauge: Sensor Monitor

View both configuration settings and actual data from your sensors in full color and high resolution. Battery/Voltage sensor properties in WaveGauge Sensor Monitor. Temperature sensor properties in WaveGauge Sensor Monitor. View all your sensors and SensorPlexes from your laptop. Works great as an additional WaveGauge display.


09-12-2011

ReceptorNet WaveGauge: Wireless Displays

WaveGauge's wireless displays provide instant and up-to-date information about your boat or RV's important systems. Easy-to-press buttons makes it easy to navigate through sensor information and set audible and remote alarms. A large backlit graphical LCD screen is easy to see, no matter the weather conditions or time of day. The intuitive interface allows you to easily view readings from all installed sensors.


09-12-2011

ReceptorNet WaveGauge: SensorPlexes

Complete with mounting tabs and built-in protection from moisture, corrosion, and oil, every SensorPlex is designed to be installed in the most demanding areas of your boat or RV. Each port on the SensorPlex supports almost all WaveGauge sensors and gateways combinations, so you can decide what mix of sensors match your need. WaveGauge systems are easily upgraded. Dual Battery / 12v power option.