ReceptorNet WaveGauge: Gateways

By: Receptornet Technologies  09-12-2011
Keywords: Sensors, Boat Or Rv

ReceptorNet offers the following WaveGauge gateways for your boat or RV:

  • Send text message alerts to your cellular phone  
  • View all sensors from your laptop
  • Configure your WaveGauge system

Gateways allow your WaveGauge system to connect with the outside world. Through the cellular gateway, WaveGauge is capable of sending text message alerts to your cellular phone. With the PC gateway you can access your WaveGauge system using a laptop and set important configuration settings.

Maintain peace-of-mind when away from your boat or RV because WaveGauge's cellular gateway can send text message alerts to your cellular phone. If your bilge high water or battery voltage alarm is triggered, the cellular gateway will transmit a short SMS text message to your cellular phone. You can also send a text message to WaveGauge and retrieve a status update for any of your sensors.

Cellular Gateways require a SIM card from a cellular provider of your choice. That means you decide on the cellular plan, for example pay-as-you-go, which provides you with the best value.

Specifications:

Dimensions (w x l x h): 5.1" x 3.1" x 1.5" (129.54mm x 78.74mm x 38.1mm)
Power: 0 - 24V volts DC
Weight: .5 lbs
Mounting: 4 x mounting tabs
4 x 10-32 screws
Operating Temperature: -22 to 122°F (-30 to 50°C)
Waterproofing: IP 67 (sealed enclosure)
Connectors: (to SensorPlex)
SMA (to antenna)

The PC gateway connects to any pc's usb port and communicates with your WaveGauge system. With the pc gateway it's easy to set configuration settings or view measurements from any of your sensors.

Specifications:

Dimensions (w x l x h): 2" x 1.5" x 1" (50.8mm x 38.1mm x 25.4mm)
Power: N/A
Weight: 8 ounces
Mounting: 2 x mounting tabs
2 x 10-32 screws
Operating Temperature: -22 to 122°F (-30 to 50°C)
Waterproofing: IP 67 (epoxy potted electronics)
Connectors: (to SensorPlex)
USB 2.0 (to PC)

Keywords: Boat Or Rv, Sensors,

Contact Receptornet Technologies

Email

Print this page

Other products and services from Receptornet Technologies

09-12-2011

ReceptorNet WaveGauge: Sensors

It is easy to accurately measure bilge pump on/off cycles, run-time, and high water with the WaveGauge Bilge sensor. The Bilge Sensor measures bilge pump activity and measures high water levels in your bilge. Monitor bilge pump on/off cycles, cumulative run-time, and cycle run-time. Works with non-metallic tanks or your existing tank sender unit. Tank level Tank level (US or European tank level sender unit. X mounting tabs2 x 10-32 screws.


09-12-2011

ReceptorNet WaveGauge: Sensor Monitor

View both configuration settings and actual data from your sensors in full color and high resolution. Battery/Voltage sensor properties in WaveGauge Sensor Monitor. Temperature sensor properties in WaveGauge Sensor Monitor. View all your sensors and SensorPlexes from your laptop. Works great as an additional WaveGauge display.


09-12-2011

ReceptorNet WaveGauge: Wireless Displays

WaveGauge's wireless displays provide instant and up-to-date information about your boat or RV's important systems. Easy-to-press buttons makes it easy to navigate through sensor information and set audible and remote alarms. A large backlit graphical LCD screen is easy to see, no matter the weather conditions or time of day. The intuitive interface allows you to easily view readings from all installed sensors.


09-12-2011

ReceptorNet WaveGauge: SensorPlexes

Complete with mounting tabs and built-in protection from moisture, corrosion, and oil, every SensorPlex is designed to be installed in the most demanding areas of your boat or RV. Each port on the SensorPlex supports almost all WaveGauge sensors and gateways combinations, so you can decide what mix of sensors match your need. WaveGauge systems are easily upgraded. Dual Battery / 12v power option.