Silver Creek Cedar Premium Products Ltd - products

By: Silvercreek Bc  09-12-2011
Keywords: Shingles, Cedar Shakes

Products of the Utmost Quality

Silver Creek stocks a full selection of authentic Western Red Cedar Shakes and Shingles for your roofing and sidewall projects. We manufacture Hand-Split and Re-Sawn Shakes in either Premium or #1 Grades and can offer sizes ranging from ½” to 2 ¼” thickness at the butt by 18” or 24” lengths.

We also produce Taper-Sawn Shakes (sawn on both faces) from 5/8” to 1” plus thickness at the butt by 18” or 24” lengths. We also make Shingles in 16”, 18” and 24” lengths in a Premium Grade.

Ridge Cap and Starter Shingles are available to accompany your order. All cedar Shakes and Shingles can be treated with CCA or Fire suppression chemical to suit your needs or local building code requirements.

We also can have dimensional cedar lumber custom-cut in virtually any length or grade, depending on your needs.

Keywords: Cedar Shakes, Shingles

Other products and services from Silvercreek Bc

09-12-2011

Cedar Shingles - Silver Creek Cedar Premium Products Ltd

On 24-inch shingles, unlimited sapwood and flat grain, limited knots and defects above clear portion allowed, tight knots and defects allowed in upper half. On 24-inch shingles, limited sapwood and flat grain, limited knots and defects above clear portion. 0.5-inch Royals, 0.45-inch Perfections, 0.4-inch 5X. NUMBER 2 GRADE: clear face from butt end – 11.


09-12-2011

Shingle Ridge Caps - Silver Creek Cedar Premium Products Ltd

Hip and ridge product type selection should be performed in accordance with the aesthetic look desired. The appropriate hip and ridge unit should be selected to match the adjacent shingles or shakes. In many areas a tapersawn hip and ridge units is used on both shingle and shake applications. Steeper slopes require special application).


09-12-2011

Taper-Sawn Shakes - Silver Creek Cedar Premium Products Ltd

Lower half is clear, flat and cross grains allowed, tight knots and defects allowed in upper half. Random, 4-inch minimum, (3-inch on Number 2 Grades) 14-inch maximum. Clear heartwood, maximum 20% flat grain.


09-12-2011

Hand-Split Shakes - Silver Creek Cedar Premium Products Ltd

1/2-inch Medium, 3/4-inch Heavy, minimums or thicker. PREMIUM GRADE: clear heartwood, 100% edge grain. Clear heartwood, maximum 20% flat grain. Premium & No. 1 Grades.


09-12-2011

Silver Creek Cedar Premium Products Ltd - certifications

QAI QUALITY AUDITING INSTITUTE INSPECTION AGENCY. MIAMI-DADE COUNTY PRODUCT CONTROL APPROVAL.


09-12-2011

Shake Ridge Caps - Silver Creek Cedar Premium Products Ltd

Hip and ridge product type selection should be performed in accordance with the aesthetic look desired. The appropriate hip and ridge unit should be selected to match the adjacent shingles or shakes. In many areas a tapersawn hip and ridge units is used on both shingle and shake applications. NUMBER 1 GRADE HANDSPLIT: manufactured from Number 1 Grade shakes. BLUE LABEL TAPERSAWN: manufactuered from Number 1 Grade shakes.