NavStar Geomatics Ltd » GNSS Devices

By: Navstar Geomatics  09-12-2011
Keywords: Gps Receiver, Deformation Monitoring

When NavStar began working on deformation monitoring projects, we used GNSS equipment from several other manufacturers. While we are still quite happy to use competing products when they are the right tool for the job, we were never able to find a GNSS receiver that was just right for automated monitoring. The solution was to start our own line of GNSS equipment. The design of these high quality receivers is based on our many years of experience as GNSS users.

GMS202

The GMS202 is a dual frequency ethernet enabled GPS receiver that forms the backbone of any monitoring system. This device is typically used as a basestation and will be installed at strategic locations around a site to provide a constant, stable, reference system.

GMS301

The GMS301 is our most popular GPS receiver. It is a low cost, single frequency GPS receiver that is capable of very high accuracies when properly implemented. Ultra low power consumption and integrated WiFi make this receiver the GPS unit of choice for most deformation monitoring projects.

GMS302

The GMS302 is our most versatile GPS receiver. This dual frequency unit integrates high quality L1/L2 GPS measurements with low power consumption (2 watts), WiFi, and rugged construction. When accuracy or long range are key requirements, the GMS302 delivers.

Keywords: Deformation Monitoring, Gps Receiver

Contact Navstar Geomatics

Email

Print this page

Other products and services from Navstar Geomatics

09-12-2011

NavStar Geomatics Ltd » Software

This GeoExplorer compatible server application resides on a central server where it processes GNSS data that can be viewed by users anywhere in the world using the GeoExplorer interface. From a small single sensor project, to a huge project with multiple sites, hundreds of sensors, and many users, these applications are up to the task.


09-12-2011

NavStar Geomatics Ltd » Custom Devices

In the past we have designed GPS units for tracking assets, automatically enabling / disabling equipment based on location, and locating personnel. Designed for implementation in large WiFi networks, the WMA100 is capable of GPS positioning, power management, intrusion detection, and reporting. The TRM102 is a special hardware device used most often in total station monitoring systems.


09-12-2011

NavStar Geomatics Ltd » Geotechnical

Our vibrating wire interfaces allow you to integrate data from your favorite geotechnical sensors (ie: piezometers, extensometers, crackmeters) into our real-time data management software. It also includes GPS for live sensor positioning and precise time, as well as a WiFi interface for live data when possible. To complement our suite of GPS/GNSS devices, NavStar is proud to include other sensor types in our systems.


09-12-2011

NavStar Geomatics Ltd » Products

When we started working extensively on deformation monitoring projects, we knew we would need the perfect GPS unit to achieve the accuracy and reliability levels that our clients demanded. After trying equipment from several manufacturers, we realized we were not going to find what we needed; so, we designed and built it ourselves.


09-12-2011

NavStar Geomatics Ltd » Services

The team at NavStar works hard to support our clients and the monitoring systems that they depend on. We continue to work with our clients to make sure that they always have the help they need. Our commitment to support does not stop when an installation is complete. Great service is the cornerstone of our business.