MK Technologies - MKT1500 Automotive Shop Alignment System

By: Mk Technologies  09-12-2011
Keywords: Car , Automotive Shop, Chassis Alignment

The MKT1500 Automotive Shop Alignment System is a set of tools used to perform complete four-wheel alignments on any car, allowing technicians to do their own work rather than sending it out to the local alignment shop. The MKT1500 is based on MK Technologies’ extensive racing experience related to the design and manufacture of chassis alignment equipment. This portable system is designed to be used with a standard automotive hoist.  
MKT1500 shown with optional Laser Toe Angle Gauge
and Laser Toe Gauge Tables.

The stands are available in custom heights. A tool tray is fitted at the bottom, and each stand has a step to stand on for adjusting the car’s suspension from the top if required. The system sets up in minutes and breaks down for easy storage. The system consists of the following: • Four MKT1500 car stands: The stands are 20” high and can be made level with four leveling feet per stand. There is a pocket in each stand designed to accommodate any combination of scales, turntables, or slip tables. • One MK Technologies Universal Toe-bar system: fully adaptable system clamps onto any car and gives the user a centerline reference from which all four wheels can be checked for toe settings. • One MK Technologies Toe/Camber/Caster Board: measures toe quickly and accurately when used with the strings on the Universal Toe-bar. Camber/Caster can be measured using the Smart Level attached to the back of the toe board.• Mechanical turnplates: for settling the front suspension after lifting the car and assisting in measuring caster. • Slip tables: for settling the rear suspension after lifting the car.

Keywords: Automotive Shop, Car , Chassis Alignment

Other products and services from Mk Technologies


MK Technologies - MKT2000 Scale Platform

The MKT2000 platform is perfectly suited to formula or sports racing cars and comes complete with 10” x 8” scale pads. This compact and lightweight system is designed to fit into the smallest trailer and is easy to handle and set-up. The MKT2000 comes with 4” x 2” bridges and ramps.


MK Technologies - MKT3000 Scale Platform

Add a set of our optional Adjustable Bridges and you can adjust for wheelbase as well, giving you the flexibility needed to set up a wide variety of vehicles. It uses 6” x 2” bridges and ramps and is engineered to be lightweight and easy to set up. The system was designed for Touring Car, solo, formula cars or sports racing prototypes. A full size platform built for 15” x 15” scale pads.


MK Technologies - ZeD Scale Pads

ZeD is MK Technologies’ new zero-deflection scale pad, the most accurate scale pad on the market.For years MK Technologies’ top of the line custom scale platform, the MKT5000 has utilized the phenomenal performance and accuracy of custom built zero-deflection scale pads.


MK Technologies - MKT1000 Scale Platform

This extreme rigidity ensures repeatable set-ups in any location on any type of surface, yet they are light and easy to transport. The MKT1000 can be ordered with our extension leg kit to make it easier to service the underside of the car while on the scales. MKT1000 Roll-off Trays incorporate the same design technology found in our industry-leading scale platforms.



At MK Technologies, we design and build our platforms to the highest standards togive our customers the three main features they need the most:Reliability– engineered to be square and rigidAccuracy– consistent, repeatable resultsSpeed– quick and easy assembly. Just like our scale platforms and chassis alignment equipment, MK Technologies pit equipment uses innovative design and all-aluminum construction to meet the high standards of racers.


MK Technologies - MKT3700 Scale Platform

The MKT3700 is very popular with Daytona Prototype teams as it features special ramps that allow low front-end spoilers to climb up onto the platform without bottoming. This platform system features a bonded and riveted full-sized top sheet for increased pontoon rigidity, and narrower scale pockets custom-fit to suit your car.


MK Technologies - MKT3500 Scale Platform

Add a set of our optional Adjustable Bridges and you can adjust for wheelbase as well, giving you the flexibility needed to set up a wide variety of vehicles. The platform comes with broad 10” x 2” bridges and ramps with support legs.The MKT3500 is adjustable for track right out of the box. MK Technologies' class-leading scale platform is built for NASCAR, GT, or Touring Car.