Installing Metal Screening on Iron gates
Touch of Class Aluminum & Ironworks
Wrought Iron Gates, Driveway Gates, Iron Gates
Coquitlam, BC: Serving as a security & privacy add-on to the metal gates in Vancouver installed in the front of buildings, Metal screens are very helpful & attractive in their appeal & rich look. A range of such screens is now available in the market, starting from casted screens to decorative design screens. And the best thing is that they can be customized with respect to the particular needs. Their installation is not very difficult.
The know-how of Installing screens
At the time of making purchase of metal sheets for your gates in Vancouver, they can be cut into required dimensions before installing them on the gates. First, it is needed to open the gate or double metal gates halfway. In case there are double gates attached, make sure the screens are attached one at a time. The next step is to position the screen panel against the inner face of the gate. It gives better appearance from the front side of the gate. To properly place the screens along the gate’s lower end, align them with the lower horizontal rail of the gate corner to corner. Then look for sidewise alignment & check for uniform spacing on all the sides. Now only the tie-up work is remaining.
Getting the corners attached
For tying the screens, it is suggested to start from the upper corners by inserting aluminum cables through the corner openings on the screen. Looping the cable’s ends along the supporting rails would help in fitting the screen on the gate. The similar tie-up is needed for all the remaining corners of the gates along with cable ties at the sides & edges of the screen. And it completes the task of getting a secure metal screen for a gate.
, Driveway Gates
, Gates Vancouver
, Iron Gates
, Metal gats
, Wrought Iron Gates