Visual & Audible Alerting Interface for Nortel IP Phones 2002 and 2004 with CS 1000
Algo Communication Products
The 8001 IP Alerter is an add-on device that allows external visual or audible alerters (purchased separately) to be used with Nortel’s IP 2002 and 2004 telephones with a Communication Server 1000 (CS 1000).
Typical applications include ring notification in noisy or noise-sensitive environments such as factories, warehouses, hospital nurseries and recording studios. Other applications include use in emergency service environments where telephone answering and quick response are critical (e.g. fire, ambulance, and police).
- Monitors IP telephone for Ring and In-Use at the telephone location
- May be connected downstream of one or more Key Expansion Modules
- Powered by telephone
Requirements and Compatibility
- Requires Nortel Communication Server 1000 (CS 1000) Release 4.0 and later
- IP 2002 or 2004 telephone
Connect the IP Alerter into the back of the telephone.
Plug one or two alerter devices (i.e. lights or loud ringer) into the IP Alerter’s Ring or In-Use ports.
Within CS 1000, configure the IP Alerter (which appears to the system just as a Key Expansion Module would) by setting Key 0 of the Alerter (the “KEM”) in System Programming as an appearance of the line to be monitored.
Once set, telephone alerting is activated.
| Description || Product Code |
|8001 IP Alerter (includes IP Alerter, User Guide and 1.8m (6’) 2.5mm cord) ||8001 |