Azden Corporation :: ENG/Pro :: Mixers :: FMX-42a 4-Channel Portable Mixer

By: Azden  09-12-2011
Keywords: Frequency Response

Having 4 balanced XLR line/mic inputs with individual level and pan controls, the FMX-42a provides switchable (per channel) 48V phantom power and limiting, professional quality VU meters for accurate level setting, master level control, 1k tone generator, 2 balanced XLR outputs (line/mic switchable), stereo mini-jack output for DV cameras, 10-pin Camera Return, mini-jack Camera Return and a headphone monitor with level control.

The FMX-42a can be powered by either 6 internal "AA" batteries or an optional 12V DC external supply (Locking 4-Pin Hirose connector). A ballistic nylon carrying case is included.

Technical Specs:
GENERAL
Frequency Response
Balanced and Unbalanced Output:
20 Hz - 30 kHz (+0 / -1.5 dB)

Monitor Out: 30 Hz - 30 kHz (+0 / -2 dB)

Signal-To-Noise
Balanced Output: -120 dBu
(A weighted, Input Equivalent Level)

T.H.D.
Balanced Output: <0.005% @ 1 kHz (@ LINE position +19 dBu output)

Phantom Power Voltage: 48V (± 4V)

Sample Tone Freq: 1 kHz

POWER
Battery Requirement: 6 Alkaline “AA”
Battery Runtime: Approx. 9 hours (Meter Illum. & Phantom Power OFF)
External Power: 12VDC @ 200 mA (10.5-17VDC - Locking 4-Pin Hirose Connector)
Current Drain:
164 mA (Meter Illum. & Phantom Power OFF - @ 9V)
192 mA (Meter Illum. OFF/Phantom Power ON w/1 [email protected])
125mA (Meter Illum. & Phantom OFF @15V)

DIMENSIONS
56H x 220W x 160D mm (without protrusions)
2.25H x 9W x 6.5D inches (without protrusions)

Weight: 1350 g (w/o batteries)
3 lb (w/o batteries)

INPUT
Balanced Input:
XLR 3-pin Female x 4 (CH1, 2, 3 and 4)

Level
Line Input - Standard : +4 dBu (electronically balanced)
- Maximum: > +26 dBu

Mic 1  - Standard: -38 dBu (electronically balanced)
- Maximum: +4 dBu
Impedance: 2k ohm

Mic 2  - Standard:-58 dBu (electronically balanced)
- Maximum: -15 dBu
Impedance: 2K ohm

High Pass Filter (HPF):
100 Hz – 6 dB/oct

Return Inputs: Hirose 10-pin Female for Hirose Part #RM15TD-10P
3.5mm (1/8") Stereo Mini-jack
Input Level: -20 dBu - +19 dBu (unbalanced)
Impedance: 11k ohm

OUTPUT
Balanced Output: XLR 3-pin x 2 (Output L and R)
Hirose 10-pin Female
Unbalanced Output: 3.5 mm (1/8") Stereo Mini-jack
Monitor Output: 6.3 mm (1/4") Stereo jack

Level
Electronically Balanced Output
Standard: +4 dBu (> 10 k ohm load)
Maximum: +20 dBu (>10 k ohm load)
Impedance: 600 ohm

Electronically Balanced Output
Standard: -36 dBu (> 10 k ohm load)
Maximum: -20 dBu (>10 k ohm load)
Impedance: 600 ohm

Unbalanced Output
Standard:-36 dBu (> 10 k ohm load)
Maximum:-20 dBu (> 10 k ohm load)

Monitor Out - Max.: +1 dBu - 32 ohm @9V
(16-100 ohm load recommended)

Meters
Standard Level: 0 VU (+4 dBu)

Keywords: Frequency Response

Other products and services from Azden

09-12-2011

330LT Dual-Channel UHF twin Body-Pack Combo System

The 330 Series is a high quality dual-channel UHF camera-mount wireless system that features 188 User-Selectable frequencies displayed on an LCD screen to assure you of always finding a "free" channel. The series consists of the 330UPR dual-channel On-Camera receiver, the 35BT Belt-Pack transmitter, the 35HT Handheld microphone/transmitter and the 35XT Plug-In transmitter. 28 dBm (100% Deviation - Mic Level.


09-12-2011

Azden Corporation :: Event Video :: All Microphones :: Shotgun :: SMX-20 DSLR Stereo Microphone

The attached output cable terminates with a 3.5 mm stereo mini-plug and connects directly into the camera?s microphone jack. Its wide frequency response, low noise and directional sound is a major step-up from the camera?s built in microphone. Designed to work with today?s high performance DSLR cameras, the SMX-20 offers directional high quality stereo sound.


09-12-2011

ENG/Pro :: Shotgun :: SGM-3416

Designed for video and audio professionals, the super-directional electret condenser microphones offer wide frequency response and low noise. Each microphone is tested before leaving the factory and comes with its own frequency response chart. A custom carrying case, flocked foam windscreen and shock-mount microphone holder are included. External phantom power between 11 and 52 VDC is required to operate the microphones.


09-12-2011

Azden Corporation :: Contractor :: VHF :: On-Camera :: WMS-PRO DSLR Wireless System

This versatile system consists of the WM-PRO belt-pack transmitter 2 plug-in electret condenser microphones, a lavalier and handheld and the WR-PRO receiver which comes with both shoe-mount and hook and loop fastener. The "all-time" best selling wireless microphone for videography.