A.W. Cook Cement Products - products

By: Awcook Cement  09-12-2011
Keywords: Coatings, Bonding, Grout

Cook Products

Vertical Repair- Typically hand applied mortars use for overhead and vertical patching of concrete, where forming is impractical. Regular set and fast setting are available.

Horizontal Repair- Trowel applied mortars for the repair of commercial and residential horizontal concrete surfaces. Polymer modified and fast setting mortars for quick turn around are available.

Pre-packaged, high strength, fiber reinforced scratch and brown, single coat or decorative finish coats. Products available in concentrate and sanded pre-mixes for ease of use.

High strength, shrinkage compensated grouts for industrial use. For use in grouting structural columns, machinery base plates, grouting pre-cast wall panels, prison cells, pre-stressed columns, etc. Our family of non-shrink grouts are available in dry pack, plastic, flowable and fluid consistencies.

A high strength mortar used to grout the popular "Thin Brick" used on building facades. Available in pre-blended colors, Thin Brick is ready to use, just add water.

Acrylic additive for addition to most any Portland cement product to enhance bonding and physical characteristics. Bonding agent is a one time re-emulsifyable surface prepping agent for use prior to application of stuccos, repair products and self leveling underlayments.

Trowel or brush applied coatings for damp-proofing poured concrete or masonry walls above or below grade.

Pumpable grout used to grout in and around cathodic protection systems in pile jackets. Regular and fast set formulas are available.

CMETEC Products

For repair of existing brick and concrete manholes prior to receiving chemical coatings and to stop water infiltration and exfiltration.

Dry gunned Shotcrete mortar, Microsilica Concrete Mix, jobsite added Microsilica additives are valuable products used for structural repair of concrete in industrial plants where high early strengths and earlier coating of epoxy type products is required.

Beautify plain concrete floors with attractive overlays and stains.

Regular setting and fast setting polymer modified mortars for repairing overhead and vertical concrete substrates.
Hand applied in areas where forming is impractical.

Polymer modified mortars for repairing and resurfacing damaged horizontal concrete substrates.

Fast setting pourable underlayment for interior floors to smooth concrete prior to the installation of flooring products such as carpet, tile, stone, wood, vinyl composition tile, etc.

Trowel down, flexible cement coating system for preventing moisture intrusion to concrete structures.

Acrylic additives for addition to horizontal and vertical repair products as well as an additive to enhance physical properties of other Portland cement mortars. Bonding primer creates better bonding of repair products to existing concrete.

A blend of Portland cement, pozzolans, silica fume, expansion aids and plasticizers for the placement of grouted helical piers.

Keywords: Bonding, Cathodic Protection, Cement Product, Coatings, Grout, Mortars, Polymer Modified Mortars, Thin Brick,

Other products and services from Awcook Cement

09-12-2011

A.W. Cook Cement Products - services

If you are a distributor specializing in concrete construction, decorative concrete, stucco, cathodic protection, micropiles or concrete restoration please check out our CEMTEC and COOK BRAND products. We also offer our formulations under private label as well as blending of your formulations.