Atlas Resistance Piers | Atlas Systems

By: Atlas Piers Of Atlanta  09-12-2011

The Atlas Resistance® Pier is a manufactured, two-stage product designed specifically to produce structural support strength. First, the Pier Pipe is driven to a firm bearing stratum; then the lift equipment is combined with a manifold system to lift the structure. The Atlas Resistance® Pier System procedure provides measured support strength. Atlas Resistance® Piers are spaced at adequate centers where each pier is driven to a suitable stratum and then tested to a force greater than required to lift the structure. This procedure effectively load tests each pier prior to lift and provides a measured Factor of Safety on each pier at lift.


60,000lbs to 140,000lbs

Contact Atlas Piers Of Atlanta


Print this page

Other products and services from Atlas Piers Of Atlanta


Helical Piles | Atlas Piers of Atlanta

These systems are designed, tested, and proven economical solutions for applications in expansive soils, high water tables, fill areas, and other areas where unstable soils require specialized support. These helical piles offer the performance of concrete without the high mobilization costs and liabilities of driven or auger-cast piles and drilled shafts.


Foundation Repair Products | Atlas Piers

The bracket is placed under the existing footing and the pier is slowly advanced to a sufficient load bearing strata (typically bedrock). This bracket and pier combination is used for existing foundations to provide lift and/or stabilization. Under footing bracket with RESISTANCE Pier.