Gutter Installation Service
All of our gutters are hung using zinc coated fasteners, with gutter hanger spacing 14″ to 16″ on centre for added strength. The industry norm is 18″ to 24″ on centre. We use 3″ aluminum low profile outlets for maximum water flow. and also use premium gutter sealant. Our standard downpipe is 2″ by 3″. A 3″ round is available or 3″ by 4″ box style.
We custom cut and fit all of our corners, and do not use strip mitres. This process ensures a strong, tight, and great looking corner with no seams!
Gutter cleaning – Interior
Our gutter cleaning service consists of removal of debris by hand and a complete flush of the gutters and down pipes system. We also conduct a water test to see if any joints are leaking.
Gutter cleaning – Exterior
Washed by hand to restore the aluminum to its original sheen.
Our leak repair service consists of a thorough cleaning and removal of all old sealant, then we use a solvent to clean and prep the joint for new sealant. Once done and cured, we guarantee the leak won’t redevelop for 2 years! A TEN year warranty is available when we install our 25 year warranty Leaf and Needleguard at the same time. If no debris gets in the gutter system except water then there will be no backup and drainage issues which cause excessive weight and flexing of the joints.
Can you imagine never cleaning your gutters again for a minimum of 25 years? As an added feature, Alu-Rex products significantly strengthen the gutter system to the point that you can hang your own body weight from them (although we do not recommend it!). This extra strength gives you peace of mind during heavy snowfalls, and that your gutters wont be damaged by the immense weight load as the snow stars to slide off your roof. They will also not bend or crush when you rest a ladder against it for your various household projects.
Alu-Rex’s Leaf Guard products are in use by 90% of all gutter installers because it is “simply the best”.
We also carry 2 styles of cleanout boxes, V funnels, rain diverters, and rain capture barrels.
Browse through our previous work below!