Viair Air Suspension Compressors - Arnott Air Suspension Systems

By: Arnott Air Ride  09-12-2011
Keywords: Stainless Steel, Compressor, Air Suspension

Air Suspension COMPRESSORS




The 092C compressor is for light duty applications. Ony recomended for use with .05 and 1 gallon air tanks.0.5 Gallon Tank Fill Rate
0 To 80 PSI 48 Seconds
55 To 80 PSI 16 Seconds
0 To 105 PSI 1 Min. 08 Sec.
85 To 105 PSI 14 Seconds
0 To 120 PSI 1 Min. 23 Sec.
90 To 120 PSI 25 Seconds 1 Gallon Tank Fill Rate
0 To 80 PSI 1 Min. 42 Sec.
55 To 80 PSI 35 Seconds
0 To 105 PSI 2 Min. 20 Sec.
85 To 105 PSI 30 Seconds
0 To 120 PSI 3 Min. 04 Sec.
90 To 120 PSI 54 Seconds • 12-Volt
• Permanent Magnetic Motor
• Duty Cycle: 9% @ 100 PSI
• Max. Working Pressure: 120 PSI
• Amp Draw: 10 Amps
• Inlet Filter Assembly Included
• Inline Check Valve
• Dimensions: 7.50” L x 2.10” W x 4.30” H
• Net Weight: 2.50 lbs.Warranty Information:
One Year


The 100C comes with a 10.5" stainless steel braided leader hose with ¼” NPT swivel male fitting hose end and rubber isolated mounting feet as well as insulated electric terminals. *Must be used with a 130 PSI or lower pressure, non-adjustable pressure switch when used with an air tank0.5 Gallon Tank Fill Rate
0 To 105 PSI 45 Seconds
85 To 105 PSI 9 Seconds
0 To 120 PSI 55 Seconds
90 To 120 PSI 15 Seconds 1 Gallon Tank Fill Rate
0 To 105 PSI 1 Min. 28 Sec.
85 To 105 PSI 19 Seconds
0 To 120 PSI 1 Min. 46 Sec.
90 To 120 PSI 30 Seconds• 12-Volt
• Permanent Magnetic Motor
• Duty Cycle: 15% @ 100 PSI
• Max. Working Pressure: 130 PSI
• Amp Draw: 14 Amps
• Min. Ambient Temp: -40° F
• Max. Ambient Temp: 158° F
• Stainless Steel Braided Leader hose
• Dimensions: 6.25” L x 3.30” W x 4.90” H
• Net Weight: 3.50 lbs.Warranty Information:
One Year Warranty


The 380C is a truly-rated continuous duty, 12-volt, 200 PSI compressor. It is capable of filling a 5-gallon tank from 165 PSI to 200 PSI in 3-1/2 minutes consistently, while never pulling more than 16 amps of power (@13.8 volts). It is the choice for those who wish to keep the strain on their vehicles’ charging systems to a minimum. Features include a standard ¼” stainless steel braided leader hose with inline check valve and insulated wiring for simple installation. *Must be used with a 200 PSI or lower pressure, non-adjustable pressure switch when used with an air tank. 2.5 Gallon Tank Fill Rate
0 To 145 PSI 3 Min. 48 Sec.
0 To 200 PSI 6 Min. 10 Sec.
110 To 145 PSI 1 Min. 12 Sec.
165 To 200 PSI 1 Min. 40 Sec. 5 Gallon Tank Fill Rate
0 To 145 PSI 8 Min. 35 Sec.
0 To 200 PSI 14 Min. 45 Sec.
110 To 145 PSI 2 Min. 42 Sec.
165 To 200 PSI 3 Min. 30 Sec. • 12-Volt
• Permanent Magnetic Motor
• Duty Cycle: 100% @ 100 PSI, 55% @ 200 PSI
• Max. Working Pressure: 200 PSI
• Amp Draw: 16 Amps
• Min. Ambient Temp: -40° F
• Max. Ambient Temp: 158° F
• Dimensions: 9.00” L x 4.00” W x 7.00” H
• Net Weight: 8.00 lbs.Warranty Information:
One Year Warranty


The dual 380C compressor setup builds up to 200 PSI of pressure using only 32 amps of power. This means that your system will run strong and last twice as long as systems using a single compressor. With this kind of low amp draw. Your vehicle will make more horsepower when your compressors are running. You'll never have dim headlights or an engine that suffers from performance-robbing high amp draw again.5 Gallon Tank Fill Rate
0 To 200 PSI 7 Min. 11 Sec.
165 To 200 PSI
(Recovery Rate) 2 Min. 6 Sec. • 12-Volt
• Permanent Magnetic Motor
• Duty Cycle: 100% @ 100 PSI, 55% @ 200 PSI
• Max. Working Pressure: 200 PSI
• Amp Draw (both units): 32 Amps
• Min. Ambient Temp: -40° F
• Max. Ambient Temp: 158° F
• Dimensions (each): 9.00” L x 4.00” W x 7.00” H
• Net Weight (each): 8.00 lbs.Warranty Information:
One Year Warranty


The 480C features include horizontal cooling fins and a trapezoidal head design, a standard 3/8” stainless steel braided leader hose with inline check valve and insulated wiring for simple installation. * Must be used with a 200 PSI or lower pressure, non-adjustable pressure switch when used with an air tank. 2.5 Gallon Tank Fill Rate
0 To 145 PSI 2 Min. 29 Sec.
0 To 200 PSI 5 Min. 02 Sec.
110 To 145 PSI 57 Seconds
165 To 200 PSI 1 Min. 23 Sec. 5 Gallon Tank Fill Rate
0 To 145 PSI 6 Min. 02 Sec.
0 To 200 PSI 10 Min. 08 Sec.
110 To 145 PSI 1 Min. 55 Sec.
165 To 200 PSI 2 Min. 20 Sec. • 12-Volt
• Permanent Magnetic Motor
• Duty Cycle: 100% @ 100 PSI, 50% @ 200 PSI
• Max. Working Pressure: 200 PSI
• Amp Draw: 19 Amps
• Min. Ambient Temp: -40° F
• Max. Ambient Temp: 158° F
• Dimensions: 11.50” L x 4.30” W x 6.50” H
• Net Weight: 11.00 lbs. Warranty Information:
One Year


The dual 480C compressor setup builds up to 200 PSI of pressure using only 39.3 amps of power. This means that your system will run strong and last twice as long as systems using a single compressor. With this kind of low amp draw. Your vehicle will make more horsepower when your compressors are running. You'll never have dim headlights or an engine that suffers from performance-robbing high amp draw again.5 Gallon Tank Fill Rate
0 To 200 PSI 5 Min. 2 Sec.
165 To 200 PSI
(Recovery Rate) 1 Min. 15Sec. • 12-Volt
• Permanent Magnetic Motor
• Duty Cycle: 100% @ 100 PSI, 50% @ 200 PSI
• Max. Working Pressure: 200 PSI
• Amp Draw (both units): 39.3 Amps
• Min. Ambient Temp: -40° F
• Max. Ambient Temp: 158° F
• Dimensions (each): 11.50” L x 4.30” W x 6.50” H
• Net Weight (each): 11.00 lbs.Warranty Information:
One Year Warranty

Universal Compressor Mounting Bracket

Photos: 1 | 2


Universal Compressor Mounting Bracket for use with Viair brand compressors.
-Allows for easier mounting
-Works with Viair 380C and 480C compressors
-3/16" Black zinc plated steel contruction

Dual Compressor Wiring Harness



Dual Compressor Wiring HarnessPrewired and terminaled for simplified installationIncludes relay assemblys and fuse holders

Have a question? Want to phone in your order?

To order or ask technical questions call us toll free at 1-800-251-8993.

Our office hours are:
8:30 AM to 6:30 PM Monday-Friday

Keywords: Air Suspension, Air Suspension Compressors, Compressor, Gallon Tank, Pressure Switch, Stainless Steel,

Other products and services from Arnott Air Ride

09-12-2011

Motorcycle Air Suspension, Motorcycle Air Suspension for Harley, Honda and more

From my first contact with Lisa and Cory, and you listening to my concerns etc., to the education you gave me, to the prompt appointment schedule and professional installation, the whole experience was professional, personal and pleasant. Just wanting to say thanks for the Great Air Ride System you installed on my 2000 Harley Heritage Softail while I was in Florida for Daytona Bike Week.


09-12-2011

Air Suspension Inflation Systems - Arnott Air Suspension Systems

The new Arnott® Quad Air Control I inflation system features our new computerized hand held controller for manually controlling four air springs with individual pressure. The complete control system includes our exclusive valve block manifold. 110 / 145 Pressure Switch.


09-12-2011

Air Suspension Valve Blocks - Arnott Air Suspension Systems

Rise Time: approximately 3 to 5 seconds.Product Features:Easy to install Show quality look Anodized aluminum body 1/8" NPT ports Zinc plated mounting bracket Kip solenoid valves Stainless steel solenoid body Buna seals Built in desiccate air dryer Easy to follow installation instructions Made in the USAWarranty Information:One Year Warranty.


09-12-2011

12 in. Complete Bilstein Rear Air Suspension System Harley-Davidson® Motorcycles Arnott Air Suspension Systems

Designed to work accordingly with its comfortable cruising and smooth handling, our system is complemented with our load-leveling technology for better highway handling, and the shocks are designed for a softer, more manageable ride. F or those who love the open road, a comfortable ride headed out of the city and into the sunset, Arnott® presents the most owner-focused system in the industry for your Touring bike.


09-12-2011

12 in. Black Bilstein Rear Air Suspension System Harley-Davidson® Motorcycles Arnott Air Suspension Systems

F or those who love the open road, a comfortable ride headed out of the city and into the sunset, Arnott® presents the most owner-focused system in the industry for your Touring bike. First, at the core of this impressive system we used an 11-way adjustable Aldan shock, which is custom machined from 6061 billet aluminum. Our air suspension kit will allow you to raise or lower the rear shocks through the full range of the suspension?s travel.