Key Switch - Type 3: Aerocon Systems

By: Aerocon Systems  09-12-2011
Keywords: key switch

* High-reliability, S.P.D.T. keyswitch made by C and K.

* Flat-black nylon bezel and body. Bezel diameter 0.875".

* Approximately 0.6" behind-the-panel clearance. 0.75" diameter threaded bushing with nut.

* Solder-loop terminals. UL, CSA approved.

* Weight, 7 grams.

Very cool looking switch, rock solid construction. This is the only key switch I would trust to maintain power to my flight computer in flight.

Keywords: key switch

Other products and services from Aerocon Systems

09-12-2011

Parachutes and deceleration devices for rockets, airplanes, helicopters, kite recovery, high altitude balloons, sea anchors

Parachutes and deceleration devices for rockets, airplanes, helicopters, kite recovery, high altitude balloons, sea anchors. A parachute reefed as this one is can mimic the drag of a much larger chute. 32 inch shroud lines, 1/16 inch nylon with a reefing line. Nominally for a 4 pound vehicle. Weight is 28 grams with the bag.


09-12-2011

Remove before flight flags and warning streamers for bicycles, motorcycles, rockets, aircraft, and aerospace applications - Remove Before Flight Flag

Custom worded flags in RBF-9 style are available, minimum quantity is 30 flags. Polyethylene flag with heat sealed fold and grommet hole.


09-12-2011

Remove before flight flags and warning streamers for bicycles, motorcycles, rockets, aircraft, and aerospace applications - RBF

Perfect for your SAFETY KEY SWITCH or for shorting pins or plugs or other arming and safety functions. Buy several and you'll never lose that "special" key or forget to arm your electronics. Red nylon grosgrain streamer with white silkscreen lettering on one side. Minimum order is 200 flags plus a silk screen artwork charge. Key ring is 1" diameter, flag is 6.5" long by 1".