Advantage Engineering » Blog Archive » Coolant

By: Aec Group  09-12-2011
Keywords: Advantage Engineering, Highest Level Of Engineering,

Advantage Engineering » Blog Archive » Coolant

Two lines are better than one.

When an engine cooling system isn’t handling its load the engine deteriorates quicker and is more likely to overheat. The best way to insure it’s effectiveness is with a periodic coolant exchange. A cooling system operates best when the coolant’s additives are still effective. These additives enable the coolant to carry away heat and inhibit corrosion.

AEC Group Inc.’s designs allows you to do it right. Unlike evacuate and fill apparatus (most one-line systems), the ADVANTAGE ENGINEERING COOLANT EXCHANGER two-line design can quickly and effectively exchange virtually all of the coolant.

What does our two-line solution deliver?

Fast. How about an exchange rate of approx. 1 gallon/minute with the engine off?

Easy. Silk screen valve position references on Advantage Engineering Coolant Exchangers, Delrin (non-heat conductive) adapters, and readily visible volumes.

Clean. No messy mixing. All of the old coolant is extracted and captured in the waste coolant reservoir.

Why Coolant Exchanger from AEC?

Technicians find AEC Group Inc. equipment easy to use. Owners find them robust and intuitive. Located in Southern California, AEC Group Inc. proudly designs and builds all of its equipment in-house. Strong design and manufacturing oversight enables us to offer customers the highest level of engineering innovation, training, and after sale support backed by a limited 1 year warranty.

Keywords: Advantage Engineering, Highest Level Of Engineering,

Other products and services from Aec Group

09-12-2011

Advantage Engineering » Blog Archive » Diesel Fuel

Easy to use, the ADVANTAGE ENGINEERING DIESEL FUEL PRO, is a safe and effective way to maintain and optimize diesel fuel performance and reduce emissions, fuel consumption, and down time. Strong design and manufacturing oversight enables us to offer customers the highest level of engineering innovation, training, and after sale support backed by a limited 1 year warranty.


09-12-2011

Advantage Engineering » Blog Archive » Fuel System

With specially formulated Advantage Engineering Petrol Fuel System Cleaning Solution and Filters, the FUEL PRO system provides comprehensive way of maintaining optimum fuel system and vehicle performance, fuel delivery, and reduced exhaust emissions. We proudly design and build all of our equipment in our Santa Ana, CA facility to insure our customers the highest level of engineering and support.


09-12-2011

Advantage Engineering » Blog Archive » Transmission

To give our customers the most flexibility, TRANS PRO, TRANS PRO+, and MULTI-MODE models offer an intuitive control panel with up to four service modes as well as revenue control. MULTI-MODE has an additional new fluid reservoir to select between different transmission fluids without cross contamination and reduce down time associated with changing fluids.


09-12-2011

Advantage Engineering » Blog Archive » Brake

An ADVANTAGE ENGINEERING BRAKE PRO is a convenient, quick, and efficient way to evacuate and exchange brake fluid from most brake systems. Recommended by all vehicle manufacturers, brake fluid degradation is often overlooked because it is gradual. Maintain your competitive advantage – and your customers’ peace of mind. Give your customers peace of mind by offering brake fluid service.


09-12-2011

Advantage Engineering » Blog Archive » Engine Flush

With a patented and comprehensive selection of spin-on and canister adapter applications, an Advantage Engineering Engine Flush System will allow you to service virtually all cars and light trucks sold in North America. We call it a “complete oil change” as this process allows us the ability to remove virtually all of the carry over oil that a typical oil change leaves behind.