Advanced Power & Performance Solutions » Archive » Solution by EngineMaxx

By: Advanced Power  09-12-2011
Keywords: engine, Fuel, Diesel

Advanced Power & Performance Solutions » Archive » Solution by EngineMaxx


  • Reduces Air Pollution
  • Reduces downtime
  • Reduces friction
  • Reduces downshifting
  • Reduces heat
  • Eliminates water
  • Cleans injectors
  • Increases mileage
  • Increases engine life
  • Increases horsepower
  • Anti-Gel that lowers cold filter plug point -42° F/C
  • Eliminates algae, fungus, and water sludge
  • Removes carbon, gum and varnish deposits
  • Stabilizes Fuel

In addition to the above benefits, regular use of SOLUTION also provides:
Cetane Enhancement (without alcohol)
Promotes a smoother running engine by

  • Horsepower
  • Performance
  • Cold weather starting
  • Fuel consumption
  • Smoke
  • Emissions

Lubrication - Protects

  • Injectors
  • Top cylinder area
  • Rubber “O” rings
  • Valves
  • Injector Pump
  • Cylinder liners

Fuel Stability - Eliminates:

  • Fuel stratification
  • Particulate Fallout
  • Sludge Formation

Seal Conditioner - prevents shrinking of:

  • Fuel pump diaphragms
  • Other rubber fuel system parts
  • Rubber “O” rings


  • Reduces fill time
  • Increases storage capacity

SOLUTION also conditions the fuel for cold weather with a cold flow improver that reduces the plugging point by 42° F


The quality of diesel fuel has been on a steady decline since 1973. With today’s poor quality fuels - breakdown, hesitation, filter clogging, injector malfunctions, erratic combustion efficiency, intolerable emissions, moisture, sludge, algae, fungus and poor fuel economy are common problems.

All diesel stocks contain high concentrations of paraffin, with the low sulphur fuels containing the most. As the ambient temperature drops, solid wax crystals form in the fuel. The temperatures in which these crystals form is the “Cloud Point”. The crystalline formation continues as the temperature drops and wax begins to collect on the fuel filter. Eventually, the wax build-up will choke the fuel supply completely clogging the fuel filter. The “Cold Filter Plug Point” (CFPP) is the temperature at which the fuel becomes so viscous that it will barely allow the fuel to flow. At this point, filters will no longer function.

Kerosene or gasoline is sometimes added to diesel fuel to dilute its paraffin content and, therefore, reduce the CFPP. However, this also reduces the BTU value and the lubricating properties of the fuel. The result is less power and reduced lubrication for the fuel injectors and the valves, which can eventually ruin the engine.


SOLUTION (originally marketed as ATL Inc. D-B) was the world’s first multi-functional fuel additive containing a cold flow improver. The Anti-Gel in SOLUTIONreduces the size of the wax crystals so that they will pass through the filter. This allows the fuel to flow and prevents clogging of the fuel filter. Diesel engine operators all over the world have benefited from the cold flow improver capabilities of this product.

*Custom blending can be done for climates where sustained temperatures fall below -30° F


CUMMINS, STANADYNE, BOSCH and other fuel injector pumps are already suffering catastrophic failure. Injector pump rebuilders are busier than they have ever been.

CUMMINS: Rubber “O” ring on the throttle rod shrinks allowing the fuel to blow past the seal as it gushes out the side of the pump.

BOSCH: Rubber seal on fuel injector head shrinks, allowing fuel to leak past the seal

STANADYNE: Metering rod in the pump sticks because of reduced lubricity of the fuel, causing the engine to stall.

CATERPILLAR: Not only do the “O” rings in the fuel injection pump shrink, causing leakage, but the rubber “O” rings on the fuel injection nuzzle can shrink, allowing fuel to dribble down into the cylinder, washing the cylinder out and diluting the oil. The result - the engine must be replaced.

Algae or fungus feed on the wax, causing more problems than before. The wax or paraffin is less stable and will fall out of solution causing loss of BTU value and more sludging. Low sulfur diesel does not burn as well, resulting in more soot in the oil. This means the oil gets thicker, darker and dirtier faster than before. The result - more frequent oil changes. Less lubricity means more wear to the top cylinder area and fuel delivery system.


SOLUTION for year round protection against fuel injection system failure and a 20°F drop in cold filter plugging.

Will not harm:

  • Oxygen sensors
  • Particulate traps

Will not void manufacturer’s warranty

  • Injector cleaner
  • Lubricity agent
  • Moisture remover
  • Carbon eliminator
  • Fuel stabilizer
  • Anti-gel
  • Power Booster
  • Smoke Retardant

Contains NO methanol, ethanol, isopropyl alcohol or sulfur

Share: These icons link to social bookmarking sites where readers can share and discover new web pages.

Keywords: air pollution, Cold Filter Plug, Diesel, engine, Fuel,

Contact Advanced Power

Email - none provided

Print this page

Other products and services from Advanced Power


Advanced Power & Performance Solutions » Engine Performance

Advanced Power & Performance Solutions» Engine Performance. Anti-Gel that lowers cold filter plug point -42° F/C. Eliminates algae, fungus, and water sludge.


Advanced Power & Performance Solutions » Archive » Total Gas Treatment

Advanced PPS Total Gasoline Treatment with PB 9000 CAN REDUCE EMISSIONS 50-90% Regular Unleaded and Advanced PPS TGT will outperform super unleaded in most engines AND extend spark plug life 2 to 3 times. These deposits cause a stream of fuel that dribbles or squirts a liquid into the combustion chamber rather than a finally misted vapor, which the engine needs to burn the fuel efficiently.


Advanced Power & Performance Solutions » Lubrication

Powerful antioxidants, anti foam agents and corrosion inhibitors to protect against contaminants. Outstanding oxidation resistance - long life at high racing temperatures. Very High Viscosity Index - extra wear protection at high temperatures. Very low volatility - stays in grade.


Advanced Power & Performance Solutions » Archive » Concentrate Additive

ENGINE: Initial Treatment: 240 mL of Advanced PPS Concentrate For maximum benefit use 120 mL in every oil change after the initial treatment. During each scheduled differential service, Advanced PPS Concentrate is added at the ratio of 30 mL/L of differential fluid. TRANSMISSION: During each scheduled transmission service - Automatic: A total of 120 mL of Advanced PPS Concentrate.


Advanced Power & Performance Solutions » Revelation

Our mileage is up .5 to .7 mpg and when we go through the mountains, we are no longer dropping 4 or 5 gears, it is 1, maybe 2 at the max. We have a 2006 Cummins ISX 500, it has increased our torque, power and fuel mileage. It is a completely different truck now!Tom & Sharon BridgesSedalia. Advanced Power & Performance Solutions» Revelation.