Advanced Power & Performance Solutions » Archive » Concentrate Additive

By: Advanced Power  09-12-2011

Advanced Power & Performance Solutions » Archive » Concentrate Additive

BENEFITS

  • Reduces wear by 47%
  • Dramatically reduces heat
  • Reduces noise and vibration
  • Improves overall performance
  • Reduces energy consumption
  • 100% concentrate additive
  • Dramatically reduces friction and maintenance expense and time



Advanced PPS Industrial Concentrate Additive will dramatically reduce friction for any metal part that requires a lubricant. Advanced PPS Concentrate is proven in engines (gasoline and diesel), transmissions (automatic and standard), differentials and power steering. It reduces vibration and temperature in many types of gearboxes, and especially hydraulic systems.

Advanced PPS Concentrate is compatible with most forms of lubricants, hydraulic fluids, cutting fluids, and other industrial oils. It is also proven in all types of engines and industrial equipment.

APPLICATIONS

  • C.N.C. Machines: Gear Boxes, Electric Drive Motors
  • Transmissions, Differentials, Hydraulic Systems, Gear Reduction Boxes, Slide Way Oils
  • Compatible with most petroleum, vegetable and synthetic oils
  • Can be used throughout industry where metal contact is a concern. An excellent addition for any preventative maintenance program

DIRECTIONS

Transmissions:

Manual: Add 30 mL/L

Automatic/Fluid Drive: Over 2 Ton rating - Add 30 mL/L for up to 189 L capacity

(Over 189 L: Add 15 mL/L)

Gear Boxes

Add 60 mL/L

Hydraulic Fluid:

Add 30 mL/L up to 189 L capacity (Over 189 L: Add 15 mL/L)

Cutting Fluids:

Oil based only: Add 60 mL/L (DOES NOT MIX WITH WATER BASED CUTTING FLUIDS OR WATER BASED HYDRAULIC FLUIDS)

CONCENTRATE ADDITIVE APPLICATIONS (metric)


PASSENGER VEHICLES and LIGHT TRUCKS and MARINE APPLICATIONS

*Advanced PPS CONCENTRATE directions for use:

ENGINE: Initial Treatment: 240 mL of Advanced PPS Concentrate For maximum benefit use 120 mL in every oil change after the initial treatment.

TRANSMISSION: During each scheduled transmission service - Automatic: A total of 120 mL of Advanced PPS Concentrate. Standard: Concentrate is added at a ratio of 30 mL/L

POWER STEERING: 30 mL of Advanced PPS Concentrate total

DIFFERENTIAL: During each scheduled differential service, Advanced PPS Concentrate is added at the ratio of 30 mL/L of differential fluid

AIR CONDITIONING: 30 mL of Advanced PPS Concentrate total

*INDUSTRIAL VEHICLES (Rated 1 Ton or over) & INDUSTRIAL EQUIPMENT

directions for use :

ENGINE: Over 4.7 L capacity, Concentration is added at a ratio of 60 mL/L with petroleum based oil or synthetic oil. (Every oil change, add an additional 60 mL/L)

TRANSMISSIONS: Automatic: During each scheduled transmission service, 1 Ton to 3 Ton rated vehicles: 120 mL of Concentrate total. 3 Ton rated vehicles and over: Concentrate is added at a ratio of 15 mL/L of transmission fluid. Standard: During each scheduled transmission service, Concentration is added at a ratio of 30 mL/L of transmission fluid.

DIFFERENTIAL: During each scheduled differential service, Concentrate is added at a ratio of 30 mL/L of differential fluid.

POWER STEERING: Advanced PPS Concentrate is added at a ratio of 30 mL/L of power steering fluid.

HYDRAULICS: Concentrate is added at a ratio of 30 mL/L of hydraulic fluid. Most hydraulic systems do not totally change fluid, because so much new fluid is added on a regular basis, therefore, when new fluid is added, the appropriate dosage of Concentrate should be added to the fluid.

AIR CONDITIONING : Concentrate is added at a ratio of 30 mL for every 2.27 kg of refrigerant.

OUTDOOR / MARINE APPLICATIONS

Directions for use:

INBOARD/OUTBOARD MOTORS: Add 60 mL/L of oil (subsequent oil changes - 30 mL/L)

OUTBOARD VRO (Oil injected): Add 60 mL/L

LOWER UNIT AND STERN DRIVE : Add 30 mL/L of oil

* For vehicles subjected to above average operating conditions towing, performance vehicles, fleet vehicles etc.

Add at every oil change at 30 mL/L of oil used

CONCENTRATE ADDITIVE APPLICATIONS (imperial)


PASSENGER VEHICLES and LIGHT TRUCKS and MARINE APPLICATIONS

*Advanced PPS CONCENTRATE directions for use:

ENGINE: Initial Treatment: 8 oz. of Advanced PPS Concentrate For maximum benefit use 4 oz. in every oil change after the initial treatment.

TRANSMISSION: During each scheduled transmission service - Automatic: A total of 4 oz. of Advanced PPS Concentrate. Standard: Concentrate is added at a ratio of 1 oz./quart

POWER STEERING: 1 oz. of Advanced PPS Concentrate total

DIFFERENTIAL: During each scheduled differential service, Advanced PPS Concentrate is added at the ratio of 1 oz./quart of differential fluid

AIR CONDITIONING: 1 oz. of Advanced PPS Concentrate total

*INDUSTRIAL VEHICLES (Rated 1 Ton or over) & INDUSTRIAL EQUIPMENT

directions for use :

ENGINE: Over 5 quart capacity, Concentration is added at a ratio of 2 oz./quart with petroleum based oil or synthetic oil. (Every oil change, add an additional 2 oz./quart)

TRANSMISSIONS: Automatic: During each scheduled transmission service, 1 Ton to 3 Ton rated vehicles: 4 oz. of Concentrate total. 3 Ton rated vehicles and over: Concentrate is added at a ratio of 1/2 oz. of transmission fluid. Standard: During each scheduled transmission service, Concentration is added at a ratio of 1 oz./quart of transmission fluid.

DIFFERENTIAL: During each scheduled differential service, Concentrate is added at a ratio of 1 oz./quart of differential fluid.

POWER STEERING: Advanced PPS Concentrate is added at a ratio of 1 oz./quart of power steering fluid.

HYDRAULICS: Concentrate is added at a ratio of 1 oz./quart of hydraulic fluid. Most hydraulic systems do not totally change fluid, because so much new fluid is added on a regular basis, therefore, when new fluid is added, the appropriate dosage of Concentrate should be added to the fluid.

AIR CONDITIONING : Concentrate is added at a ratio of 1 oz. for every 5lbs. of refrigerant.

OUTDOOR / MARINE APPLICATIONS

Directions for use:

INBOARD/OUTBOARD MOTORS: Add 2oz./quart of oil (subsequent oil changes - 1 oz./quart)

OUTBOARD VRO (Oil injected): Add 2 oz./quart

LOWER UNIT AND STERN DRIVE : Add 1 oz./quart of oil

* For vehicles subjected to above average operating conditions towing, performance vehicles, fleet vehicles etc.

Add at every oil change at 1 oz./quart of oil used.

Material Safety Data Sheet

SECTION 1 COMPANY IDENTIFICATION AND CHEMICAL PRODUCT
Company/Manufacturer Name: Advanced Technology Lubricants, Inc.
Address: 5889 Airport Road, Ste# 1426,Port Orange, FL 32128
Phone / Fax: Phone 386-322-1666 Fax 386-322-0509
Trade Name: Concentrate Additive
Chemical Name: Petroleum Hydrocarbon
Chemical Family: Petroleum Hydrocarbon
Formula: Proprietary
CAS#: Proprietary
Applications: Concentrate Additive is for use as an oil additive used to reduce wear and friction in a number of machine applications.
SECTION 2 COMPOSITION / INFORMATION ON INGREDIENTS
General: This Product is Non - Hazardous. This Product contains No Known Carcinogens. No special warning labels are required under OSHA 29 CFR 1910.1200.
FDA Statement: N/A
SECTION 3 HAZARDS IDENTIFICATION
Appearance: Thick, Clear Liquid, Amber tint
Known Hazards: This product does not require any special warning labels under OSHA 29 CFR 1910.1200, and contains no known hazardous ingredients.
SECTION 4 FIRST AID MEASURES
Eyes: Flush with clean, lukewarm water (low pressure) occasionally lifting eyelids. Physician assessment if eyes are inflamed.
Skin: Wash affected areas thoroughly with soap and water. Wash contaminated clothing before reuse.
Inhalation: Avoid breathing oil mists. Remove to fresh air. Give artificial respiration if not breathing. Oxygen may be given by qualified personnel if breathing is difficult. Get medical attention.
Ingestion: Do not induce vomiting. Force fluid. Seek Medical Attention Immediately.
SECTION 5 FIRE FIGHTING MEASURES
Flash Point: COC (ASTM D-92) 480°F
Flammable Limits: N/A
Auto Ignition Temp: N/A
Fire & Explosive Hazards: LOW FIRE HAZARD - Do not cut, drill, or weld empty containers
Extinguishing Media: Dry chemical foam, water spray, carbon dioxide for small fires
Fire Fighting Procedures: Contain liquid, cover with extinguishing agent, use water spray to cool fire exposed containers & as protective screen. Do not point solid water stream directly into burning fluid to avoid spreading.
Share: These icons link to social bookmarking sites where readers can share and discover new web pages.


Contact Advanced Power

Email - none provided

Print this page

Other products and services from Advanced Power

09-12-2011

Advanced Power & Performance Solutions » Engine Performance

Advanced Power & Performance Solutions» Engine Performance. Anti-Gel that lowers cold filter plug point -42° F/C. Eliminates algae, fungus, and water sludge.


09-12-2011

Advanced Power & Performance Solutions » Archive » Solution by EngineMaxx

With today’s poor quality fuels - breakdown, hesitation, filter clogging, injector malfunctions, erratic combustion efficiency, intolerable emissions, moisture, sludge, algae, fungus and poor fuel economy are common problems. All diesel stocks contain high concentrations of paraffin, with the low sulphur fuels containing the most. The crystalline formation continues as the temperature drops and wax begins to collect on the fuel filter.


09-12-2011

Advanced Power & Performance Solutions » Archive » Total Gas Treatment

Advanced PPS Total Gasoline Treatment with PB 9000 CAN REDUCE EMISSIONS 50-90% Regular Unleaded and Advanced PPS TGT will outperform super unleaded in most engines AND extend spark plug life 2 to 3 times. These deposits cause a stream of fuel that dribbles or squirts a liquid into the combustion chamber rather than a finally misted vapor, which the engine needs to burn the fuel efficiently.


09-12-2011

Advanced Power & Performance Solutions » Lubrication

Powerful antioxidants, anti foam agents and corrosion inhibitors to protect against contaminants. Outstanding oxidation resistance - long life at high racing temperatures. Very High Viscosity Index - extra wear protection at high temperatures. Very low volatility - stays in grade.


09-12-2011

Advanced Power & Performance Solutions » Revelation

Our mileage is up .5 to .7 mpg and when we go through the mountains, we are no longer dropping 4 or 5 gears, it is 1, maybe 2 at the max. We have a 2006 Cummins ISX 500, it has increased our torque, power and fuel mileage. It is a completely different truck now!Tom & Sharon BridgesSedalia. Advanced Power & Performance Solutions» Revelation.