Assembling | Ace Billiards Calgary

By: Ace Billiards Calgary  09-12-2011
Keywords: Pool, pool table, Dismantling

Assembling / Dismantling

If you have just moved into the area or purchased a new/used pool table and the table is dismantled in the room you wish it to be assembled, this is the

you are looking for. We will position the table for optimum playability or to your specifications. We will replace any worn or missing hardware and professionally assemble and level your table.

You may need your table dismantled if you are installing new carpet or flooring, etc. Your pool table is dismantled and all the pieces are marked to guarantee that the table will be re-assembled correctly. The pool table is then neatly stacked to your satisfaction.

Keywords: Dismantling, Pool, pool table

Contact Ace Billiards Calgary

Email

Print this page

Other products and services from Ace Billiards Calgary

09-12-2011

Moving | Ace Billiards Calgary

We come back after your carpets have been installed, lower the table wherever you like, then re-level the table so you can be ready to play. Specially made pool table dollies can be used if you require your table to be moved from one location to another within a room. Often re-leveling your pool table can be achieved by adjusting the legs or by adding / removing shims beneath legs.


09-12-2011

Recovering | Ace Billiards Calgary

We remove all of the old staples, ensure that the frame and the playing surface is level, the cushions are fully secured to the rails and the seams between the slates are properly sealed with Bondo where needed. Link to open up a window to see how different fabric colors look with different table colors. This is done when you want to replace the old cloth with new cloth of your choice.


09-12-2011

Rerubbering | Ace Billiards Calgary

If the proper bounce off your rails is lacking, it is possible that the rubber on the rails has dried out or decomposed and needs to be replaced. New cushions are applied and allowed to set overnight before the new cloth is put on. The old cushions are removed and the rail facings are cleaned of all glue.