Remote Reels

By: Swisco Machining  09-12-2011
Keywords: Wires, Extension Cord

Remove *Snap ring and nut  * Front aluminum flange  *Pull off plastic wrap drum  * Fasten wires to open side of connector bar

Remote/Extension Cord Reels

DSCF0126.jpg ¬DSCF0127.jpg ¬DSCF0129.jpg ¬DSCF0128.jpg ¬

Remote / Extension Cord Reels require no plug.

Permanently wired for easy and safe use.

100% contact even while spool is turning.

Rated for maximum 15 AMP

Has six wires to be used for remote and extension cord simultaneously. This is done through a single six wire extension cord.

Extension Cord easily connects to a wire terminal well protected inside of wrapping spool.

If used for extension cord only, you may double up the wires to increase the AMP rating.

To Connect the extension cord to spool

Remove *Snap ring and nut  * Front aluminum flange  *Pull off plastic wrap drum  * Fasten wires to open side of connector bar

* Securely fasten cord to centre pipe using wire ties  * Reassemble

Keywords: Extension Cord, Wires

Contact Swisco Machining

Email - none provided

Print this page