In-Situ Machining Solutions : Onsite Machining : Alberta, Canada - studRemoval

By: Insitu Machining  09-12-2011
Keywords: In-situ Machining

Large Diameter HD400 Drilling and Tapping Machine

In-Situ Machining has completed many large stud removal projects with 100 plus studs drilled out from 1” to 4” diameter.

This portable drilling machine is ideal for repetitive drilling and stud removal, this machine can drill up to 10” (250mm) diameter holes dependant on material and depth of cut. Standard stroke length is 10” (250mm) but extended versions are available to 20” (500mm).

> tapping attachements up to 5"dia

> 20" stroke extension

Remove broken or siezed studs in-place. Re-size and re-thread in- place when threads have been damaged. We do excellent work on: turbines, pumps, valves, heavy equipment, exchanger, to name a few.

Rely on our experience and our first class equipment to get the job done right and on time - the first time!

Services include:

  1. Spot Facing
  2. Drilling
  3. Boring
  4. Tapping

Stud Removal Photos:

HD-100 Stud Remover: designed to drill 3" diameter holes in any depth material

Drilling out broken stud on a turbine casing.

Drilling and taping a butterfly valve.

.

Keywords: In-situ Machining

Other products and services from Insitu Machining

09-12-2011

In-Situ Machining Solutions : Onsite Machining : Alberta, Canada - LineBoring

In-situ's Line Boring services are ideal for those bores that are impossible to do in a shop and too hard to move off location. In-situ also does power honing for engines and compressors to get that fine finish required for your equipment to run smoothly. Blind boring - it may not be easy to reach..but we can do the job. Cylinder Boring - Enlarging holes on turbine cylinder. Machinist measuring seal bore to final sizing.


09-12-2011

In-Situ Machining Solutions : Onsite Machining : Alberta, Canada - PipeColdCutting

Pipe Cold Cutting has replaced the outdated use of torches, reed cutters, and grinders because of its precision and higher level of safety - especially when there may be gas in a line. Use the safe and fast way of cold cutting and beveling, when InSitu is done, the pipe is ready to weld. Special materials cut easily and we can easily accomodate all sizes of piping. Our Clam Shell Cutters are ideal for cutting and beveling heavy wall pipe.


09-12-2011

In-Situ Machining Solutions : Onsite Machining : Alberta, Canada - inLineValveRepair

Wedge Valve, Check Valves, Globe Valves, Control Valves, Boiler Check Valves, Parallel Slides, High Pressure Valves. < In-Situ's new SL-2 In-Line Valve Repair Tool. Water Treatement Valve Modification: After Cut. On site lapping of a 24 inch wedge gate.


09-12-2011

In-Situ Machining Solutions : Onsite Machining : Alberta, Canada - portableMilling

In-Situ started with a key mill in 1996 and then added a 4’ Portable mill in 1998 and in 2004 we purchased an 8’ Climax Portable Mill to our expanding arsenal of tools. If you have sole plates, pump bases, weld removal, alignment problems or soft foot, Call In-situ today to see how to we can help get equipment up and running. Portable Milling and Key Milling are essential services in repairing large pieces of equipment on-site.


09-12-2011

In-Situ Machining Solutions : Onsite Machining : Alberta, Canada - flangeFacing

In-Situ Machining is equipped with a full line of flange facers that can handle 0” to 13' in diameter and larger upon request. Flange Facing helps to keep your plant running efficiently. One of In-Situ specialities: Lens Ring refinishing. Refacing Hitachi turbine flange in progress. Re-Face Valve Seats & Compressors.