In-Situ Machining Solutions : Onsite Machining : Alberta, Canada - LineBoring

By: Insitu Machining  09-12-2011
Keywords: Boring, Line Boring

In-situ's Line Boring services are ideal for those bores that are impossible to do in a shop and too hard to move off location. Do not waste money moving parts to a shop when it is much more efficient to fix the parts right on location.

Our Line Boring service accomodate diameters from 1.125" to 40” with many different lengths of boring bars to fit those bores.

In-situ also does power honing for engines and compressors to get that fine finish required for your equipment to run smoothly. 6” to 36” diameters.

Line Boring and Power Honing services include:

  1. Pivots
  2. Articulating Joints
  3. Alignments on special applications
  4. Blind Boring
  5. Line Boring Compressor Cylinders
  6. Portable Power Honing

Line Boring Photos:

Line Boring a boilder feed pump


Blind boring - it may not be easy to reach..but we can do the job.

Blind boring - it may not be easy to reach..but we can do the job.

Silk Drill - works well as a hole boring unit. It's quick, efficient and cost effective.

Cylinder Boring - Enlarging holes on turbine cylinder.

Custom frame for boring turbine seal ring

Damaged Hitachi turbine seal ring

Facing bottom of seal ring in progress

Seal Ring facing in progress

Machinist measuring seal bore to final sizing.

Finished Hitachi seal ring bore.

Power Honing Hitachi turbine seal ring bore

Elongating Hitachi turbine cylinder

Line boring turbine cylinder holes

FF5000 Line Boring Tool in Action on Turbine

Keywords: Boring, Line Boring

Other products and services from Insitu Machining

09-12-2011

In-Situ Machining Solutions : Onsite Machining : Alberta, Canada - studRemoval

This portable drilling machine is ideal for repetitive drilling and stud removal, this machine can drill up to 10” diameter holes dependant on material and depth of cut. In-Situ Machining has completed many large stud removal projects with 100 plus studs drilled out from 1” to 4” diameter. Rely on our experience and our first class equipment to get the job done right and on time - the first time.


09-12-2011

In-Situ Machining Solutions : Onsite Machining : Alberta, Canada - PipeColdCutting

Pipe Cold Cutting has replaced the outdated use of torches, reed cutters, and grinders because of its precision and higher level of safety - especially when there may be gas in a line. Use the safe and fast way of cold cutting and beveling, when InSitu is done, the pipe is ready to weld. Special materials cut easily and we can easily accomodate all sizes of piping. Our Clam Shell Cutters are ideal for cutting and beveling heavy wall pipe.


09-12-2011

In-Situ Machining Solutions : Onsite Machining : Alberta, Canada - inLineValveRepair

Wedge Valve, Check Valves, Globe Valves, Control Valves, Boiler Check Valves, Parallel Slides, High Pressure Valves. < In-Situ's new SL-2 In-Line Valve Repair Tool. Water Treatement Valve Modification: After Cut. On site lapping of a 24 inch wedge gate.


09-12-2011

In-Situ Machining Solutions : Onsite Machining : Alberta, Canada - portableMilling

In-Situ started with a key mill in 1996 and then added a 4’ Portable mill in 1998 and in 2004 we purchased an 8’ Climax Portable Mill to our expanding arsenal of tools. If you have sole plates, pump bases, weld removal, alignment problems or soft foot, Call In-situ today to see how to we can help get equipment up and running. Portable Milling and Key Milling are essential services in repairing large pieces of equipment on-site.


09-12-2011

In-Situ Machining Solutions : Onsite Machining : Alberta, Canada - flangeFacing

In-Situ Machining is equipped with a full line of flange facers that can handle 0” to 13' in diameter and larger upon request. Flange Facing helps to keep your plant running efficiently. One of In-Situ specialities: Lens Ring refinishing. Refacing Hitachi turbine flange in progress. Re-Face Valve Seats & Compressors.