In-Situ Machining Solutions : Onsite Machining : Alberta, Canada - flangeFacing

By: Insitu Machining  09-12-2011
Keywords: Machining, Flange, Flange Facing

Flange Facing helps to keep your plant running efficiently, safely and more environmentally friendly. In-Situ Flange Facers save time and money by doing repairs on-site and In-place.

In-Situ Machining is equipped with a full line of flange facers that can handle 0” to 13' in diameter and larger upon request. We can also provide a wide range of facing related services.

Flange Facing services include:

  1. 0" to 13' Flanges Refaced

  2. Raised Face Flanges

  3. Flat Face Flanges

  4. RTJ Flanges
  5. Re-Face Valve Seats & Compressors
  6. Flange outside Diameter
  7. Flange Inside Diameter
  8. Lens Ring Flanges
  9. O-Ring Grooves
  10. Tube Sheet Re-facing
  11. Channel Heads
  12. Shells
  13. Man ways
  14. Oval Man way
  15. Pivot Bearing Faces on Heavy Equipment
  16. Weld Preps
  17. Chamfers

Photo Gallery

Damaged turbine flange ready for refacing

Refacing Hitachi turbine flange in progress

Finished Hitachi turbine flance face

Corroded Sulpher Flange ready for machining

Newly faced Guttermouth valve

Facing Guttermouth valve seat

Facing front side of heat exchanger tubesheet.

Refacing a large ring groove on a valve flange.

RTJ nozzle flange in a tight space.

Flange Facing channel head.

Machining back side of tubesheet flange.

Facing a 72 inch vessel head.


cover plate.

Refacing manway.

Flange facing railcar manway.

Flange facing main pivot bearings on excavators and track-hoes.

Refacing leaking reactor flange.

Lap turbine flange and any mechanical seal faces.

Milk bottle flange repair on site.

Man inside high pressure vessel machining an oval manway.

One of In-Situ specialities: Lens Ring refinishing.

Keywords: Flange, Flange Facing, In-situ Machining, Machining, Tube Sheet, Valve Seat,

Other products and services from Insitu Machining


In-Situ Machining Solutions : Onsite Machining : Alberta, Canada - studRemoval

This portable drilling machine is ideal for repetitive drilling and stud removal, this machine can drill up to 10” diameter holes dependant on material and depth of cut. In-Situ Machining has completed many large stud removal projects with 100 plus studs drilled out from 1” to 4” diameter. Rely on our experience and our first class equipment to get the job done right and on time - the first time.


In-Situ Machining Solutions : Onsite Machining : Alberta, Canada - LineBoring

In-situ's Line Boring services are ideal for those bores that are impossible to do in a shop and too hard to move off location. In-situ also does power honing for engines and compressors to get that fine finish required for your equipment to run smoothly. Blind boring - it may not be easy to reach..but we can do the job. Cylinder Boring - Enlarging holes on turbine cylinder. Machinist measuring seal bore to final sizing.


In-Situ Machining Solutions : Onsite Machining : Alberta, Canada - PipeColdCutting

Pipe Cold Cutting has replaced the outdated use of torches, reed cutters, and grinders because of its precision and higher level of safety - especially when there may be gas in a line. Use the safe and fast way of cold cutting and beveling, when InSitu is done, the pipe is ready to weld. Special materials cut easily and we can easily accomodate all sizes of piping. Our Clam Shell Cutters are ideal for cutting and beveling heavy wall pipe.


In-Situ Machining Solutions : Onsite Machining : Alberta, Canada - inLineValveRepair

Wedge Valve, Check Valves, Globe Valves, Control Valves, Boiler Check Valves, Parallel Slides, High Pressure Valves. < In-Situ's new SL-2 In-Line Valve Repair Tool. Water Treatement Valve Modification: After Cut. On site lapping of a 24 inch wedge gate.


In-Situ Machining Solutions : Onsite Machining : Alberta, Canada - portableMilling

In-Situ started with a key mill in 1996 and then added a 4’ Portable mill in 1998 and in 2004 we purchased an 8’ Climax Portable Mill to our expanding arsenal of tools. If you have sole plates, pump bases, weld removal, alignment problems or soft foot, Call In-situ today to see how to we can help get equipment up and running. Portable Milling and Key Milling are essential services in repairing large pieces of equipment on-site.